Other Data Center Subjects

Has anybody tried setting up VCS (Version Control System) in CIS (Cisco/Composite Information Server [6.2], using a TFS backend?I'm having trouble finding documentation on any VCS topics, but a TFS [scripts] example would be magnificent. Thanks 

Hii Guys ,                         As  i know we can not do mixing of F2 card with M1/M2/F1 card.  F2 needs seperate VDC. But I boot UP unconfigured  nexus 7k that contain two M family cards and rest of card is F2. So after Boot UP , Is Admin VDC aut...

How do we decide about the bandwidth required for a new link. One site has 100 users (Data), no Voice, no Video Another site has 100 users (Data, Voice, Video) My knowledge and understanding for Voice & Video users) 60-65% concurrent users.Voice - 16...

Hi There, Can anyone tell me how to make default port in Cisco Data Center 5K Switch?  When I do show run int e2/10 [the output shows as follows]   switch(config-if)#  medium p2p This interface has been changed into L3, I have tried to bring it back ...

Its a great question.

Hi,     I want to know if there is any Cisco switch available with support for both NETCONF and YANG? I know Nexus supports NETCONF but I am concerned about YANG support as well. Thanks

Hi, This is Mohammed Shareef On one of my client's site i am receiving " rx lower power threshold error on Cicso 4500 " on the ports 5/2 and 6/2, there is no uplinks on these ports. May i know why i am receiving this error and what is the solution...

What is so special about OTV? Why cant we just simply extend vlans across DCs using an L2 link between them using a service provider?

Hi!, We have a rare behavior on a couple of Nexus 7010. We have connected a new server with two interfaces configured as active/standby to a couple of nexus FEX interfaces. Something like this.-----------Server||-----> NIC1 (active) ---> Interface 10...

why FEX (2K) dual-home connections to N5K is not recommended design?

I need to migrate vlans from a pair of 6509s to a pair of Nexus 7004.  I connected the 7004 to each other with peer-link and each 7004 has a single trunk to each 6509.  The vlans show as trunking across the links but 2 things occur when I go to migra...

Hi all,I have the following setup:2 Nexus 9372PX (NX-OS Release 7.0(3)I1(1a) ) in a VPC-Configuration4 Nexus 2248TP-E, 2 are attached to Nexus_1, 2 are attached to Nexus_2Attached to one of the FEXs is a Microsoft NLB (mac_addr 03bf.0a04.023c, ip_add...