Other Data Center Subjects

Is the Lan_Base license included with the N5672UP? -WH

dears, i need to check about placing in new DC with 9K instead of 7K with considering that customer requested to start with 9K (Nexus mode) without ACI at the moment with considering upgrade option to ACI in future ! thanks

I've got to build a new PoC rig that needs to run ESXi 6.0 and on which I want to run the Nexus 1000v. I'm limited to a single host, upon which I have successfully loaded ESXi6.0 and have a system running the VCenter Server, so its a pretty basic inf...

if i have 2 OSPF WAN routers which are not connected physically and the back side LAN is running static routing and HSRP is created how can i create the redundancy between the 2 routers, without changing the LAN side configuration?

Anybody run into a problem with DCNM with a device that keeps getting stuck in "discovering" status as "switch model unknown"?   Correctly imported 3 of 4 N7K's, only having problem with one. There is no difference in config with the other three.   T...

                   My setup consists of a cisco UCS chassis and VMware running as my hypervisor.  I am using VMware ESXi5.0 build 3.  I have deployed 2 CSR1000v VM's and two linux VM's for this POC.   My first CSR1000v_1 has 3 interfaces, gig1 for ma...

hello, I was wondering if you could help me, looking for details on where I find our about recycling old Cisco routers and other and IT computer hardware in London or UK ?

Hi, In the office, try to open a big-size file stored in a shared folder of a Windows server in our IDC and it takes long. The WAN link between the office and the IDC is 4Mbps IP VPN. For example, to open a 30MB file(pdf) from a PC in the office, i...

hi all; i have 2 nexus 9k and 2 nexus 5k. I configured both 9k switches as a vPC and both of 5K switches as another vPC and they work well and everything seems right in the output of the "show vpc"command. then I interconnect each 5k switches to 2 9...

Dear Support, Is it possible to create HSRP between 2 VSS  sysstem. what are the thing we need to take care if we need to go for  HSRP between 2 VSS. waiting for feedback. Regards Mohisnamol

Hi Cisco I was install the Cisco Prime version 3.0 at our place. We have install all the license which is including Assurance license. I was enable Netflow ONLY in my CORE switch. The netflow was configure on interface vlan in our Core Switch. The ...