cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1306
Views
5
Helpful
3
Replies

Cisco OTV

kamtarias
Level 1
Level 1

Hi Guys,

 

I have to configure OTV between my DC's. On one side, I have only one VDC  and I can configure 2 more VDC's. But on another end, I already have 3 VDC's configured. Can I still configure OTV between these 2 datacenters?

1 Accepted Solution

Accepted Solutions

Hello Sudhir,

 

SUP1 and SUP2 can support maximum 4 (+1 Admin) VDCs.

With SUP2E, you can configure 8(+1) VDCs.

 

With the VDC and ADV licenses installed, if you have SUP2E, you should be able to configure 8 VDCs.

 

Best Regards,

Santhosh

View solution in original post

3 Replies 3

Santhosh S
Cisco Employee
Cisco Employee

Hello,

 

Are you running SUP1 or SUP2? Do you make use of Admin VDC or use Default VDC?

 

With Admin VDC, you get to configure 4 non-default VDCs. Please see

 

Table 4: Licensing Requirements for VDC

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/virtual_device_context/configuration/guide/b-7k-Cisco-Nexus-7000-Series-NX-OS-Virtual-Device-Context-Configuration-Guide/creating-vdc.html#reference_2FA79C06B40946568C96AA5F9ACAD9B9

Remember,  Layer-3 gateway and OTV edge for a VLAN can not reside on the same VDC. You will need a seperate VDC to serve as OTV edge device.

 

Best Regards,

Santhosh

Below is output of show license.

 


--------------------------------------------------------------------------------
MPLS_PKG Yes - Unused never -
STORAGE-ENT Yes - Unused never -
VDC_LICENSES Yes 4 Unused never -
ENTERPRISE_PKG No - Unused -
FCOE-N7K-F132XP No 0 Unused -
FCOE-N7K-F248XP No 0 Unused -
FCOE-N7K-F312FQ No 0 Unused -
FCOE-N7K-F348XP No 0 Unused -
ENHANCED_LAYER2_PKG Yes - Unused never -
SCALABLE_SERVICES_PKG Yes - Unused never -
TRANSPORT_SERVICES_PKG Yes - Unused never -
LAN_ADVANCED_SERVICES_PKG Yes - In use never -
LAN_ENTERPRISE_SERVICES_PKG Yes - Unused never -
---------------------------------------------------------------------

 

 

Based on that can i create 8 vdc's as i have vdc license as well as adv pack?

Hello Sudhir,

 

SUP1 and SUP2 can support maximum 4 (+1 Admin) VDCs.

With SUP2E, you can configure 8(+1) VDCs.

 

With the VDC and ADV licenses installed, if you have SUP2E, you should be able to configure 8 VDCs.

 

Best Regards,

Santhosh