cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

937
Views
0
Helpful
1
Replies
Anthony Walters
Beginner

Enable Jumbo Frames

Hello,

As I understand form a TAC case for enabling Jumbo frames on my N5K is :

switch(config)# policy-map type network-qos jumbo

switch(config-pmap-nq)# class type network-qos class-default

switch(config-pmap-c-nq)# mtu 9216

switch(config-pmap-c-nq)# exit

switch(config-pmap-nq)# exit

switch(config)# system qos

switch(config-sys-qos)# service-policy type network-qos jumbo

....What I need to know is how to remove this command if we run into issues.

Thanks in advance!


1 ACCEPTED SOLUTION

Accepted Solutions
Jerry Ye
Cisco Employee

You should be able to re-attach the default policy

system qos

  service-policy type network-qos default-nq-policy

HTH,

jerry

View solution in original post

1 REPLY 1
Jerry Ye
Cisco Employee

You should be able to re-attach the default policy

system qos

  service-policy type network-qos default-nq-policy

HTH,

jerry

View solution in original post

Content for Community-Ad