08-07-2013 10:41 AM - modifié 03-01-2019 07:23 AM
Dear
Please I would like to clarify a question, is that a solution of storage, such as EMC VNX5300 can be connected directly to a Fabric Interconnect, but would lose functionality when connected to a Nexus 5000 switch. I would like someone to clarify this doubt indicating that functionality is lost when direct connection would be advisable to FI or the Nexus.
Regards
le 08-08-2013 12:03 AM
In versions of UCS earlier than 2.1, you had the option to useDirect Attached Storage DAS with UCS. However, you needed a SAN switch connected to the FI so the switch could push the zone database to the FI. That is, the UCS platform was not able to build a zone database
With the release of Version 2.1, UCS now has the ability to build its own zone database. You can have DAS with UCS without the need for a SAN switch to push the zoning configuration
hope this helps
le 08-21-2013 05:50 AM
sure you can, but only with the latest UCS Manager firmware. You need to set switching mode for the FC, and configure zoning at the Fabric Interconnect switches.
If you need help with the configuration please do let me know and I'll post a document about it.
Greetings,
C.
le 11-12-2013 02:43 PM
I am setting up a 5400 directly to a FI 6248UP with the latest firmware. Can you post the document you mentioned above? This is my first o around with this. thanks!
le 11-12-2013 03:33 PM
Sure, let me look it up and I'll post it.
Greetings,
C.
Découvrez et enregistrez vos notes préférées. Revenez pour trouver les réponses d'experts, des guides étape par étape, des sujets récents et bien plus encore.
Êtes-vous nouveau ici? Commencez par ces conseils. Comment utiliser la communauté Guide pour les nouveaux membres