cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1200
Views
5
Helpful
1
Replies

issu upgrade procedure for NX-OS 6.1(2) to 6.2.12 on 7009 redundant sup1

Hi All,

I am planning to do an upgrade on nexus 7009 using ISSU.The current version is 6.1(2) and we are planning to upgrade to 6.2(12).

Could appreciate if someone has got any documentation?

Ideally zero downtime is preffered.

Thanks,

Renjith

1 Reply 1

InayathUlla Sharieff
Cisco Employee
Cisco Employee

Netstar,

First you have to upgrade to the 6.2(8) then move to 6.2(12) for ISSUe.

Table 6 Supported Direct ISSU and ISSD Paths for the Cisco Nexus 7000 Series Chassis

Current Release
Releases That Support Direct ISSU to the Current Release
ISSD

NX-OS Release 6.2(14)

6.2(12),6.2(10),6.2(8a),
6.2(8b)

No Support

NX-OS Release 6.2(12)

6.2(10), 6.2.(8a),6.2(8b)

No Support

NX-OS Release 6.2(10)

6.2(8a),6.2(8b

Below is the link on how to do the same:-

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/6_x/nx-os/release/notes/62_nx-os_release_note.html#pgfId-811992

HTH

Regards

Inayath

**Please do not forget to rate the post if helpfull***

Review Cisco Networking for a $25 gift card