I'm having trouble integrating this - I have followed the available documentation but to be honest it is extremly vague (or maybe I'm being unfair!).
I have 3 subnets, all located on the same switch, each with an SVI:
Routeable Net 1: 10.1.1.0/25 - 10.1.1.1 - VLAN 1233
Routeable Net 2: 10.1.1.128/25 - 10.1.1.129 - VLAN 1234
non-Routeable Net 3: 172.16.220.0/24 - 172.16.220.1 - VLAN 2234
My VSM IP is configured in Net 2 with my ESXi VEM modules in Net 1, so that's the L3 side of things sorted out in terms of VSM > VEM communication, I have a VSG which is also working fine and I have Cisco Prime running too so I know the platform itself is fine.
I have installed the Netscaler using the OVA, in more than one way and using different interface configurations, but for the benefit of accuracy, following the document requires 2 interfaces configured as part of the VEM network, which I did, but the NetScaler doesn't work in L2 Adjacency mode as suggested in the manual - therefore I moved it to Net2.
vservice node NS1 type adc
ip address 10.1.1.143
And on the NetScaler
> show vpathparam
Source IP: 10.1.1.143
Global EncapMode: L3
I have this configured back in the VSM on the port-profile as suggested:
port-profile type vethernet public-1234
switchport mode access
switchport access vlan 1234
system vlan 1234
However if I issue the 'show vservice brief' command I see the following:
So - vPath definitely not working, I can't even add a DNS server to the NetScaler as I can't get any packets too or from it - I can manage it from it's correct NSIP which is 10.1.1.150
NOTE: All IPs and VLANs have been updated but they relflect the idea.
Has anyone got a working config, example or have any experience integrating the NetScaler (I know this is a longshot since it was only released a week or so back, but I really need to see it working for a POC we're doing).
Please don't hesitate to ask for more info if you can help.
You aren't being unfair about the documentation at all. I've probably spent 72 hours on the phone with TAC & Citrix on this, and have received very little guidance. At this point I'm about to give them one more shot, and then the 1000V netscalers are gone. I don't have time to keep screwing around with such a poorly documented and supported environment.
If I get this working after this call (about to start it up) I'll leave the info here.
Thanks for attending our ATXs sessions! Here’s the post-session resources for easy reference.
New to ATXs? An ATXs session, offered at no cost, is an hour of real-time learning led by Cisco experts, who will answer your technology questions through produ...
Thanks for attending our Ask the Experts (ATXs) sessions! Here’s the post-session resources for easy reference.
New to ATXs? An ATXs session, offered at no cost, is an hour of real-time learning led by Cisco experts, who will answer your technology quest...
New Cisco Champion Radio release on Cisco Intersight Cloud Operations PlatformListen: https://smarturl.it/CCRS8E15Follow us: https://twitter.com/CiscoChampion Known as Project Starship when it was introduced in June 2017, Cisco Intersight has come a ...
Join us live on Thursday, April 8 at 10 am PT (and on demand after) as we join Cisco and HashiCorp executives to discuss the importance of IaC automation, Intersight Service for Terraform, and how to better manage hybrid cloud infrastructure at scale...