04-19-2016 06:15 AM - edited 03-01-2019 08:14 AM
Hi All, Am having issues getting a N3K up on a port-channel to a N9K VPC. Eth/-47 - 48 on N3K > eth1/24 on N9K1 and N9K2 VPC. Error message is
%ETHPORT-3-IF_NON_CISCO_TRANSCEIVER: Non-Cisco
transceiver on interface Ethernet1/47 is detected
Transceivers-Cables= Cisco+
N9K
transceiver is present
type is SFP-H10GB-CU5M
name is CISCO-TYCO
part number is 1-2053783-3
revision is T
serial number is TED1927C2Y8
nominal bitrate is 10300 MBit/sec
Link length supported for copper is 5 m
cisco id is 3
cisco extended id number is 4
cisco product id is SFP-H10GB-CU5M
N3K
transceiver is present
type is SFP-H10GB-CU5M
name is CISCO-LOROM
part number is LRHSPB54A050
revision is B2
serial number is LRM194992B7
nominal bitrate is 10300 MBit/sec
Link length supported for copper is 5 m
cisco id is --
cisco extended id number is 4
This is happening at 2 DC's with identical configuration. TAC has mentioned bug bug CSCuc86978, configuring 'service-unsupported-transceiver' and reboot switch. I've tried this already with no luck.
Recommendation now to reseat SFP and reboot. Anybody encountered this before.
N3K n3500-uk9.6.0.2.A6.3.bin
N9K nxos.7.0.3.I2.2b.bin
Thanks!
Solved! Go to Solution.
04-19-2016 06:22 AM
I have had a similar issue before.. Nexus 5k with Cisco brand SFP modules that fail to register in certain ports. We were lucky enough to have spare ports on the switch that for some reason accepted the SFP's. Sorry this doesn't answer your question, but you are not alone.
04-19-2016 06:22 AM
I have had a similar issue before.. Nexus 5k with Cisco brand SFP modules that fail to register in certain ports. We were lucky enough to have spare ports on the switch that for some reason accepted the SFP's. Sorry this doesn't answer your question, but you are not alone.
04-19-2016 07:36 AM
thanks.I will try a different port to see as well. currently same ports on 2 different sites with exact same results.
04-19-2016 07:08 AM
Changing mode to 'on' on port-channels brings up one side of the channel only.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide