08-07-2013 06:21 AM - edited 03-01-2019 07:23 AM
Hello
I'm trying to connect an HP Blade server with an N2K-B22HP-P to our Nexus 7004 but it stays in de download mode.
# sh fex
FEX FEX FEX FEX
Number Description State Model Serial
------------------------------------------------------------------------
116 FEX0116 Image Download N2K-B22HP-P FOCxxxxxxxx
# sh fex detail
FEX: 116 Description: FEX0116 state: Image Download
FEX version: 5.2(1)N1(1a) [Switch version: 6.1(4)]
FEX Interim version: 5.2(1)N1(1a)
Switch Interim version: 6.1(4)
Module Sw Gen: 12594 [Switch Sw Gen: 21]
pinning-mode: static Max-links: 1
Fabric port for control traffic: Eth3/44
Fabric interface state:
Po116 - Interface Up. State: Active
Eth3/44 - Interface Up. State: Active
Fex Port State Fabric Port
Logs:
08/07/2013 18:04:24.424401: Requesting satellite to download image
08/07/2013 18:04:46.442690: Module register received
08/07/2013 18:04:46.443233: Registration response sent
08/07/2013 18:04:46.443516: Requesting satellite to download image
08/07/2013 18:05:10.475657: Module register received
08/07/2013 18:05:10.476109: Registration response sent
08/07/2013 18:05:10.476390: Requesting satellite to download image
08/07/2013 18:05:36.703639: Module register received
08/07/2013 18:05:36.704118: Registration response sent
08/07/2013 18:05:36.704434: Requesting satellite to download image
08/07/2013 18:06:04.741774: Module register received
08/07/2013 18:06:04.742505: Registration response sent
08/07/2013 18:06:04.742628: Requesting satellite to download image
Solved! Go to Solution.
08-10-2013 12:49 AM
Hi Martin,
At this point in time the N2K-B22-HP FEX is not supported with the Nexus 7000 series switches as the parent switch. If you look at Table 2 in the Cisco Nexus B22 Blade Fabric Extender Data Sheet you'll see it only lists the following:
Cisco Nexus parent switch model or line card
Regards
08-10-2013 12:32 AM
Hi,
What procedural steps you done while an HP Blade server with an N2K-B22HP-P to Nexus 7004??
Sent from Cisco Technical Support iPhone App
08-10-2013 12:49 AM
Hi Martin,
At this point in time the N2K-B22-HP FEX is not supported with the Nexus 7000 series switches as the parent switch. If you look at Table 2 in the Cisco Nexus B22 Blade Fabric Extender Data Sheet you'll see it only lists the following:
Cisco Nexus parent switch model or line card
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide