10-01-2014 01:08 AM - edited 03-01-2019 07:40 AM
Hi,
We have two Cisco Nexus 7710 with the following HW configuration
Slot 1: N77-F348XP-23
Slot 2: N77--F248XP-23E
Slot 5: N77-SUP2E
When I try to create a LACP portchannel with one port on F3 and another port on F2e I receive this error (when i try to bundle the second port to the channel):
"command failed: port not compatible [Module Type Incompatible]"
I suppose that there is no compatibility between the two modules (F2e and F3). Can you tell me if there is a Cisco Document that explain this? I cannot find it.
Thanks in advance
10-07-2014 01:21 PM
What is the NX-OS version you are running. You need atleast 6.2.6 to support the inter-operability. Check the release notes below.
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/6_x/nx-os/release/notes/62_nx-os_release_note.html#77519
10-13-2014 05:38 AM
It says...
"With Cisco NX-OS Release 6.2(6), you cannot interoperate the F3 Series plus the F2 and/or F2e Series plus the M2 Series modules in the same VDC."
If I've understood well...is not possible to do a LACP etherchannel on two different modules...right?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: