OTV vlan translation

[Jong wook kim]

Hello
l have two date centers, and i am trying to configuration OTV between Cisco Nexus 7K switch on this data center.

Tere are two network zones in the DC1 and they have the same vlan unfortunately.

ex)

Web zone : vlan 10 : 10.10.10.0/24

DMZ zone : Vlna 10 :20.20.20.0/24

I am trying to configuration these two vlans(same vlan) to the data center using a single OTV.

is it possible? Or do I need to create OTV for each network network zone and configuration each one?

Should I use 1 or 2 in the attached file?

Thanks very much in advance for your time.

[Ganesh Hariharan]

Hi,

Have a look on the OTV configuration , which will be useful for more clarification...

http://docwiki.cisco.com/wiki/Nexus_7000_-_OTV_-_Design_and_Configuration_Example

http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Data_Center/DCI/whitepaper/DCI3_OTV_Intro/DCI_A.pdf

Hope it Helps..

-GI

[jkilleda]

Hello Jong wook,

OTV vlan translation

I think you can have a single OTV for the mentioned scenario.

[Rick1776]

the only clean way to do this is create separate VDC’s on each side for the AED for each of the VLAN 10s. This is just a work around and you should consider changing one of the vlans as this isn’t really manageable and could be difficult to troubleshoot.