cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

1470
Views
0
Helpful
5
Replies
Beginner

Scheduler config on NX 9000

Hi team , 

I have a problem to config a schedule job on nexus 9000 ,  I received the message below.

 

USDC1NX9000.1(config)# scheduler job name a
Error: invalid userid

 

My NXOS: version 7.0(3)I7(1) and  Nexus9000 93180YC-EX chassis

Can anyone say me how to fix it or if this is a bug?

 

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
VIP Advisor

Re: Scheduler config on NX 9000

Look at the below document for reference :

 

Note Remote users must authenticate with their clear text password before creating and configuring jobs.

 

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-os/system_management/configuration/guide/sm_nx_os_cg/sm_8scheduler.html#14506

BB
*** Rate All Helpful Responses ***

View solution in original post

5 REPLIES 5
Beginner

Re: Scheduler config on NX 9000

Hi !

 

Please, for the sake of saving steps, did you check if it is enabled? 

 

show scheduler config

it should say somewhere: 

feature scheduler
scheduler logfile size 16
end

 then you can define the job as shown here based on device version: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/system_management/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_System_Management_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_System_Management_Configuration_...

 

Regards,

 

Please, if considered, mark as Helpful or as an answer, totally grateful.

VIP Advisor

Re: Scheduler config on NX 9000

Make sure you have enabled the feature scheduler

 

CORESW2# show feature | in scheduler
scheduler 1 enabled

 

If not use below commands :

 

CORESW2(config)# feature scheduler
CORESW2(config)# scheduler ?
aaa-authentication Password for AAA authentication(of logged in user)
job Define a job
logfile Scheduler log file configuration
schedule Define a schedule
transport Configure transport related configuration

 

BB
*** Rate All Helpful Responses ***
Beginner

Re: Scheduler config on NX 9000

Yes my friend the feature is enable

USDC1NX9000.1# sh feature | include sched
scheduler 1 enabled

USDC1NX9000.1# sh scheduler config
config terminal
feature scheduler
scheduler logfile size 1024
end

config terminal
scheduler aaa-authentication username xxxxxx password xxxxxxxx
end

USDC1NX9000.1(config)# scheduler job name Bkp
Error: invalid userid


Highlighted
VIP Advisor

Re: Scheduler config on NX 9000

Look at the below document for reference :

 

Note Remote users must authenticate with their clear text password before creating and configuring jobs.

 

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-os/system_management/configuration/guide/sm_nx_os_cg/sm_8scheduler.html#14506

BB
*** Rate All Helpful Responses ***

View solution in original post

Beginner

Re: Scheduler config on NX 9000

Yeppp, I have to log in with the user configured in scheduler aaa-authentication to configure a job.

 

Thanks!!

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here