cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

808
Views
0
Helpful
5
Replies

Send Sflow more than one agent ip -collector

Hi Dear How send Sflow to more than Ip address

In switch Config only define one sflow ip-collector

How send two or more Collector my sflow Data  ????

1 ACCEPTED SOLUTION

Accepted Solutions
Sergiu.Daniluk
VIP Advisor

Hi admin@atrinnet.net 

According to configuration guide, only one collector is supported:


The switch supports only one sFlow collector.

 

Reference:  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/system_mgmt/7_x/b_Cisco_Nexus_3000_Series_NX-OS_System_Management_Configuration_Guide_7x/b_Cisco_Nexus_3000_Series_NX-OS_System_Management_Configuration_Guide_7x_chapter_010110.ht...

 

This apply for both N3K and N9K switches.

 

Best regards,

Sergiu

 

 

 

View solution in original post

5 REPLIES 5
balaji.bandi
VIP Guru

have you tried like below : (not tried checking is this accepting ?

 

sflow collector-ip 10.10.10.1 vrf xxxx
sflow collector-ip 10.10.10.2 vrf xxxx

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

I used this

sflow collector-ip 10.10.10.1 vrf default 
sflow collector-ip 10.10.10.2 vrf default 
But switch Can get one destnation For Collector ip
Donnot send to two dst sflow data

 

i look at the document -

 

- The switch supports only one sFlow collector.

 

(May that destination one can send to other one) - just an iade

 

Device send to colelctor 1  - Collector can send to other collector - not good one but possible.

Like Agrigator - and Aggrigator send to different collector kind of ?

 

 

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Sergiu.Daniluk
VIP Advisor

Hi admin@atrinnet.net 

According to configuration guide, only one collector is supported:


The switch supports only one sFlow collector.

 

Reference:  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/system_mgmt/7_x/b_Cisco_Nexus_3000_Series_NX-OS_System_Management_Configuration_Guide_7x/b_Cisco_Nexus_3000_Series_NX-OS_System_Management_Configuration_Guide_7x_chapter_010110.ht...

 

This apply for both N3K and N9K switches.

 

Best regards,

Sergiu

 

 

 

Thank you For attention

 

You think i have this Config

feature sflow sflow sampling-rate 5000 sflow max-sampled-size 200 sflow counter-poll-interval 100 sflow max-datagram-size 2000 sflow collector-ip 192.0.2.5 vrf management (PRTG For see Flow Detail )
sflow collector-ip 192.0.2.6 vrf management (Fastnetmon For Detect DDOS)

sflow collector-port 7000 sflow agent-ip 192.0.2.3

 

But in switch i set one Collector -ip (Do not set 2 Destanation For Send Sflow Data)
How solve this ??? Send sflow Data two Destanation PRTG and Fastnetmon ?????