cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1094
Views
0
Helpful
2
Replies

Upgrade a ws-3850 24X from Bundle to INSTALL

jean.casimir1
Level 1
Level 1

I am upgrading a ws-3850-24X, but it's on Bundle mode. How can I convert it from bundle to install mode.

Thanks

Jean Casimir

2 Replies 2

Leo Laohoo
Hall of Fame
Hall of Fame

Read THIS.

superego
Level 1
Level 1

I was looking for the same answer.

 

Moving 16.x Bundle Mode to Install Mode but didn't see a solution.

software install or request platform software install is not working

 

I found a fix but this will delete everything, make sure you have a copy of your config.

>Go to Rommon mode

-unplug power then plug it back

-press mode for about 12 seconds until you see amber lights blinking

>When on Rommon mode

-switch: 

-plug usb to the usbflash port in the switch with the IOS, 3850 is picky in USB, usually works with 16GB and below

-do "dir" - make sure you see the file, if not use another USB

-copy paste "emergency-install usbflash0:cat3k_caa-universalk9.16.X.X.SPA.bin"

 

***Hope this help you guys and save you grief as I did.*** 

Review Cisco Networking for a $25 gift card