cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1758
Views
5
Helpful
4
Replies

vpc and port suspension

susim
Level 3
Level 3

Hi,

I had to reboot the peer device(primary).After reboot all the  interfac showing orange colour

How to fixthe issue

 

Thanks

 

4 Replies 4

balaji.bandi
Hall of Fame
Hall of Fame

does the primary come back online? can you post below output from both the devices :

 

show vpc

show EtherChannel summary

show logg last 20 (from botht the switches)

show version

 

also check vpc troubleshoot guide:

 

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/operations/n5k_vpc_ops.html

 

 

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

susim
Level 3
Level 3

Hi,

After shudown and start the peerlink shows amber (orange) color ,

Unfortunately there is only one peer-link available 

 

here is the output  of show vpc 

 

vPC domain id : 100
Peer status : peer link is down
vPC keep-alive status : peer is alive
Configuration consistency status : failed
Per-vlan consistency status : success
Configuration inconsistency reason: Consistency Check Not Performed
Type-2 inconsistency reason : Consistency Check Not Performed
vPC role : none established
Number of vPCs configured : 4
Peer Gateway : Disabled
Dual-active excluded VLANs : -
Graceful Consistency Check : Disabled (due to peer configuration)
Auto-recovery status : Disabled
Delay-restore status : Timer is off.(timeout = 30s)
Delay-restore SVI status : Timer is off.(timeout = 10s)
Operational Layer3 Peer-router : Disabled
Virtual-peerlink mode : Disabled

 

Thanks 

Configuration consistency status : failed
Per-vlan consistency status : success
Configuration inconsistency reason: Consistency Check Not Performed
Type-2 inconsistency reason : Consistency Check Not Performed

as we have asked provide the configuration both devices.

 

show run

show vpc consistency-parameters vpc XX

show port-channel summary

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Hi @susim 

Actually the problem you have is due to peer-link being down:

Peer status : peer link is down

Verify the interfaces part of the vpc peer-link port-channel are up. Once the peer-link will come up, the peer will take the appropriate vpc role and will bring up all interfaces.

 

Stay safe,

Sergiu