11-10-2010 11:46 AM - edited 03-01-2019 06:53 AM
i am trying to configure wccp on
4507 to redirect my internet traffic to McAfe
e webgateway for content filtering.
i am not able to apply any redirect list on 4507, is it not supporting that command?
my core runs with CatOS cat4500-entservicesk9-mz.122-40.SG.bin
i am trying to apply below commands but not accepting because of redirect -list
ip wccp web-cache redirect-list 120
ip wccp 51 redirect-list 120
Can i acheive it any way ?
Also my plan is to intercept only particual VLANs and redirect to webgateway for doing content filetering.
11-11-2010 07:26 PM
I believe the Cat45xx platform (all supervisors) only supports WCCP v2 without redirection lists.
From the config guide for your version of IOS for platform:
The following limitations apply to WCCP:
•Redirect ACL for WCCP on a client interface is not supported.
The only proviso is that I haven't studied the new Sup 7. It runs IOS-XE, so the feature support is likely different.
Now, if you can restrict your 'ip wccp web-cache | service-number redirect in' to only those client interfaces that you want to capture for the McAfee filter, you can limit in that manner.
Good luck.
Hagen Amen
03-18-2013 03:22 PM
Stalin,
Please read the following:
http://www.cisco.com/en/US/prod/collateral/contnetw/ps5680/ps6870/white_paper_c11-608042.html
These are the restrictions for this platform:
The following apply only to Supervisor Engine 6-E, Supervisor Engine 6L-E, Catalyst 4900M, Catalyst 4948E, and Supervisor Engine 7-E:
Redirect ACL is supported.
Jorge.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide