07-18-2005 09:04 AM - edited 03-02-2019 11:25 PM
- Sho proc on 4000 shows 20% steady utilization. and the following two taking up most of this util. What could be wrong. I donot see any error messages in the log:
25 19693619442955991267 666 15.13% 14.19% 14.54% 0 Cat4k Mgmt HiPri
26 654394096 634943236 1030 3.76% 3.68% 5.27% 0 Cat4k Mgmt LoPri
thanks
07-18-2005 09:09 AM
These 2 processes are very generic. Get output of "sh platform health" which is more granular. Also the following page should help
07-18-2005 10:33 AM
Here is 'sho health' attached. Could you give any clues ?
07-18-2005 10:35 AM
07-18-2005 10:51 AM
The process which are high are line card management processes. What kind of modules do you have and what IOS are you running? If you have WS-X4448 modules take a look at
http://www.cisco.com/cgi-bin/bugtool/onebug.pl?bugid=CSCed29335
I suggest that you run IOS such as 12.2(18)EW4
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide