05-31-2006 04:57 AM - edited 03-03-2019 03:26 AM
Hi,
If I have two supervisor WS-X4516-10GE/2 in one cat 4500 can i use all 4 10 gig ports at the same time? I know that i wont get the bandwidth but just wanting to know if all 4 ports are active even if one supervisor is in standby mode.
Solved! Go to Solution.
05-31-2006 05:20 AM
Hi Friend,
With supV-10GE, only 2 10GE ports are active and you can use only 1/1 and 2/1 ports. All the 4 10GE ports are not active at the same time.
HTH, Please rate if it does.
-amit singh
05-31-2006 05:02 AM
HI
Yes the ports on the standby sup will be active.u can use it.
Thanks
Mahmood
05-31-2006 05:20 AM
Hi Friend,
With supV-10GE, only 2 10GE ports are active and you can use only 1/1 and 2/1 ports. All the 4 10GE ports are not active at the same time.
HTH, Please rate if it does.
-amit singh
05-31-2006 05:27 AM
HI
sorry for mistake.
Thanks Amit i had a wrong assumption thought that like all other sups this might also work.
Thanks
Mahmood
05-31-2006 05:39 AM
Its Ok mahmood, No wI am sure that you will not make a mistake next time :-)
regards,
-amit singh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide