cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
609
Views
0
Helpful
4
Replies

802.1X with Guest vlan support IOS version ???

peeling00
Level 1
Level 1

I don't know, Whitch IOS version support 802.1X with Guest vlan to Catalyst 2950 and 3550 switch

please reply to my question.

1 Accepted Solution

Accepted Solutions

You are right. That feature was introduced new for 2950 Standard Image in release 12.1(22)EA3. See table 1 in this document:

http://www.cisco.com/en/US/products/sw/iosswrel/ps5013/prod_bulletin0900aecd8021a92e.html

"The 802.1x standard with guest VLAN and 802.1x with VLAN assignment support has been added to the Cisco Catalyst 2950 platform running the Standard Multilayer Image (SMI)"

HTH

View solution in original post

4 Replies 4

jolmo
Level 4
Level 4

This feature is supported in IOS 12.1(22)EA1 , except for Catalyst 2950 Standard Image (SI)

Hope this helps

Tkank for your help.

Also, Cisco web is explained , except for Catalyst 2950 Standard Image (SI) in IOS 12.1(22)EA3

but I can't understand, My site is using catalyst 2950 SI to 802.1X and guest vlan in IOS image 12.1(22)EA3

ex) TW_14F_A_C2950_32.8#sh ver

Cisco Internetwork Operating System Software

IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(22)EA3, RELEASE SOFTWARE (fc1)

Running Standard Image

24 FastEthernet/IEEE 802.3 interface(s)

Model number: WS-C2950-24

please, reply for my question

You are right. That feature was introduced new for 2950 Standard Image in release 12.1(22)EA3. See table 1 in this document:

http://www.cisco.com/en/US/products/sw/iosswrel/ps5013/prod_bulletin0900aecd8021a92e.html

"The 802.1x standard with guest VLAN and 802.1x with VLAN assignment support has been added to the Cisco Catalyst 2950 platform running the Standard Multilayer Image (SMI)"

HTH

Thank you for your help!

I was understand.

Review Cisco Networking for a $25 gift card