01-06-2003 12:14 AM - edited 03-02-2019 03:57 AM
Hi,
can someone tell me, if it is possible to authenticate terminal-server lines with tacacs on a ACS-Server?
Thx
01-06-2003 09:15 AM
YES..you can configure that. Here is the sample config for terminal server config.
http://www.cisco.com/warp/public/793/access_dial/comm_server.html
You need to configure the terminal server for login access authenticated by ACS (tacacs). For that add following commands
aaa new-model
aaa authentication login default group tacacs local
tacacs-server host x.x.x.x
tacacs-server timeout 10
tacacs-server key xxxxx
Pl. visit following url for more
01-07-2003 12:43 AM
Hi Tejal,
thanks for your answer. This is not what I exactly want. Here some more details, we have connected Sun-Stations to the Terminal-Server and at the moment there are different accounts configured on the Terminal-Server. Thats not the best solution. What we want is, to configure each account for the lines (SUN) on the ACS.
Is this possible?
01-07-2003 09:08 AM
So basically you want the users to be authenticated to ACS before they get access to SUN (lines) via Terminal server right?
If YES, then the config that i have pointed is the right one for terminal server. Now you need to configure the ACS for users too. You need to configure those accounts (username and password) in ACS.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide