ASA Service module with VSS 6513E quad Sup 2t 10GE

[nicholas boran]

                   Hello

Just looking at adding ASA service modules to our VSS 6313E quad Supervisor 2T 10GE network.

We are running s2t54-advipservicesk9-mz.SPA.151-1.SY1.bin.

It looks like it should be fully supported for us, as per system requirements listed:

http://www.cisco.com/en/US/prod/collateral/modules/ps2706/ps11621/data_sheet_c78-672507.html

1- The document does not mention VSS with 4 sups, so would you be concerned, or do we take it for granded that the ASA service module will operate within this environmnet, once it is supported with the 2T VSS in general, on the minimum code of 15.0(1)SY1 and later, as stated.

Any advice on this would be welcome.

Thanks

Nick

[ms01]

Hi Nick,

Take a Look here.
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/15.1SY/config_guide/sup2T/virtual_switching_systems.html#wp1053927

Gereinigt
Michael
Sent from Cisco Technical Support iPad App