cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
709
Views
0
Helpful
1
Replies

ASR 920 PTP debugging

Energia
Level 1
Level 1

I do have a ASR 920 that is stuck in Freq_locked state, (it does not reach Phase_aligned), do anyone know of any useful debug commands that is able to show why it does not reach Phase_aligned?

1 Reply 1

Hello,

 

try:

 

debug network-clock errors

debug network-clock event

debug network-clock sm

 

Which IOS version are you running on your ASR920 ? Check if the bug below applies:

 

HC+BC sending packets to downstream when it is in FREQ_LOCKED.
CSCur29193
Description
Symptom:
When a Hybrid-Boundary Clock (HC-BC) node loses the phase and comes to frequency lock, it still sends PTP packets to its slaves; Which is not correct. A HC-BC node should send packets to its slave only if it itself is in PA state.

In this bug the problem is that even if HC-BC node loses phase, it still drives the slaves and as slaves receive PTP packets they remain in PA, which is not correct as the master (HC-BC) is not in PA itself.

Conditions:
Hybrid Boundary clock (HC-BC) PTP configuration

 


Known Affected Releases: (1)
15.4(3)

 

Known Fixed Releases: (6)
15.5(1.15)S
15.5(1)SN1
15.5(1)S1
15.5(1)S0.4
15.4(3)S2
15.4(3)S1.4

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: