Folks, I have a 6509 with sup1 and msfc. I am connected to one of the ports and running etherreal. I see a lot of traffic (25%) from EIGRP and when i look at packet details, it says hello packet.who would eigrp be sending so many hello packet...
Folks, I have a 6509 with sup1 and msfc. I am connected to one of the ports and running etherreal. I see a lot of traffic (25%) from EIGRP and when i look at packet details, it says hello packet.who would eigrp be sending so many hello packet...
I have a campus consisting of a couple of Cat4506+IOS at the distribution layer, and a bagful of switches (Cat4000+CatOS, Cat4500+IOS, Cat2900XL, Cat2950) at the access layer. I use CGMP to control multicasts because some of the switches do not supp...
Hi!Have anybody faced with the following problem?LACP etherchannel doesn't work between Cat6500/Sup2IOS 12.2(18)SXD4 and 3550 12.2(25)SEB. It also doesn't work between 6500 and 2950 12.1(22)EA4.Symptoms: LACP forms the channel, STP goes to listening ...
Hello,if I choose a 6500 chassis what must I add if I want to use it as a switch ?I've got 20 servers, with two ethernet cards (gigabits) so I need two modules 10/100/1000 rj45.I've got 96 ports rj45 100Mb for the computers in the building.After I've...
Hi there, I have a weird case here...I could not ping my 6509 switch's layer 2/supervisor module although it is still up and running. Any ideas on this?Thanks.
Folks, We are deploying IP Phones and want to use auto qos on the 4006 series switches. Here is what i got when i enabled auto qos on the 4006. ! qos dbl qos map dscp 24 25 26 27 28 29 30 31 to tx-queue qos map dscp 32 33 34 35 36 37 38 39 to tx-queu...
Hi all,When I have a catalyst 6506 with a sup720 engine:WS-SUP720-3Band I add a 48 port 10/100/1000 fabric enabled card:WS-X6748-GE-TXI would have a 2x20GB connection from this line card to the supervisor switch fabric.Is it so I would have 40 ports ...
sunnymon...@gmail.com Apr 26, 9:13 pm show options Newsgroups: comp.dcom.sys.cisco From: sunnymon...@gmail.com - Find messages by this author Date: 26 Apr 2005 21:13:54 -0700 Local: Tues,Apr 26 2005 9:13 pm Subject: Upgrading Cisco 3750 swit...
HiDoes any one know if there is a system like HSRP for IPX routing. We have a Lan with 2 Cat 6000 switches connected via direct links. We have enabled IP HSRP for redundancy but for IPX all that we have done is made them capable of IPX routing. We ne...
Hi all,Could you please tell me the commands to see the ports utilization in CATOS & IOS..I'm aware of show top but i need to see all ports utilization or specific ports which mention by me...Your assitance will be highly appreicated
I am a Cisco beginner, I have a general question about the cisco 1760 router. Does it have port forwarding capabilities? If yes, how do I go about setting up port forwarding rules.
Can I use the service-policy command in the outbound direction on a 3750? The documentation only seems to come with the "input" option when it is applied.Thanks.
Hi all. I currently have 2 servers utilizing Windows Network Load Balancing. I am having some degree of difficulty in getting the load balancing working correctly when directly connected to a Cisco 2950. The "cluster" works fine when I attach each...
I see I have the catOS running on my new 2948 switches, is there is no option to run the Cisco IOS on these switches? I never thought Cisco would put out a switch without their IOS running on it. When going to their download site, I'm only presente...
Hello. I want to upgrade the IOS on my 4507R (currently running 12.1(19)EW1), and the documentation says that since I have redundant Sup's, I don't need to reload the switch. The problem is that it says that the modules will reload, which, assuming i...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
09-26-2024 02:28 AM | ||
08-07-2024 06:15 AM | ||
07-17-2024 11:08 AM | ||
05-29-2024 04:52 AM | ||
02-14-2024 04:00 AM |
User | Count |
---|---|
2 | |
1 | |
1 | |
1 | |
1 |