Hi all, Good Morning I am new with IronPort devices so I am have issues with some Alert that I could not resolve it. I was looking for references on internet but I could not find solution for it. "The updater could not validate the server certificate...
Forum Posts
Hi, For my home LAB, as i am studying for CCNP, I looking to use this old ISDN 1812 to serve as a terminal server. I just cannot get it to work. So before I bother you with other questions, could it be done with an Cisco1812? The tutorial I'm using ...
Dear All, I would like to manage all of our hardware in our system including historians. However we struggle to find out the cisco versioning. How does cisco manages the versions of the hardware? We are only interested in major changes so would like ...
I read the some advantages and disadvantaged using either Essentials or Advantage. Mentions Stackwise as one I am not sure if stackwise virtual or just stackwise backplane. My guess is Essentials you can not use virtual stackwise. but can use backpl...
Hi, Has anyone deployed or sold the SM-X-ES3D-48-P module for a ISR 4351? http://www.cisco.com/c/en/us/products/routers/4000-series-integrated-services-routers-isr/relevant-interfaces-and-modules.html Documentation says its available, or possible, bu...
I'm trying to upgrade ios software for my switch WS-C2960G-24TC-L from 12.2(55)SE9-LAN-BASE-CRYPTO to latest 15.0.2-SE7(MD)this is the status message :Uploading the image.Uploading the image; this might take a few minutes/seconds...Failed to execut...
Resolved! Anyconnect stops LAN printing on a Mac
Hello, I'm just a home user of Cisco Anyconenct. The software is provided via my institution's website. The name of the most current installer is anyconnect-macos-4.4.03034 -core-vpn-webdeploy-k9.pkg. (in case it is important to know)After really a y...
Hello.We use ASA 5540 with 8.2(1) (we can't update it).I have configured netflow with commands:flow-export destination inside 192.168.1.93 9997 flow-export template timeout-rate 1 policy-map global_policy class flow_export_class flow-export event...
Is VPC peering allowed between different nexus chassis. for example I have a N9K-C9372PX-E and N7K-C7010 with N7K-SUP1. Can these be peered?
How bad is my english? :o
Hello,I was wondering if there is a way to monitor the packets going through specific ports or IPs on the Switch.MORE INFORMATION:We have a PTP GM200 clock setup broadcasting a PTP signal at 192.168.1.231, we are using an Emergent Camera at 192.168.1...
So I just moved from a different state and switched from Charter to Cox internet. My old Motorola Surfboard modem died but no big deal I bought a Netgear CM500 and it connected to the internet no problem.The problem started when I set up my Cisco Lin...
Hi,I may be in the wrong discussion group, apologies.The company I work for will release Training Budget end January 2020. I was planning to cover my ICND 1, so I was studying for the exam prior to the course. Cisco have now moved the goal post and ...
I haven't worked with Cisco equipment in a while so I wanted to double check.Do you have to reboot an old production router after disabling Telnet? I'm pretty sure you don't have to but I wanted to double check.Thank you in advance.
What is the purpose of reflector port in RSPAN? Any differnence of the RSPAN command without reflector port defined?- monitor session 1 destination remote vlan 555- monitor session 1 destination remote vlan 555 reflector-port Fa0/10
