I'm frustrated at the convoluted Cisco documentation; all I need is the syntax for configuring a 1710 WAN interface as a DHCP client on the backside of a DSL modem running DHCP server.Can anyone provide me with a link to a COMPREHENSIVE Cisco IOS 12....
I am having messive WINS broadcast request on my LAN. I don't have the WINS server installed at this point of time. What should i do to eliminate this broadcast and what impact will my hosts have. Thank you.regards
I am currently configuring the routing interfaces on 6500 MSFCs. When a standby IP is added to an interface how does the router know how you are subnetting the IP ranges? For instance if I enter 10.10.10.1 as a standby IP how does it know whether I...
I am preparing to change the reference bandwidth in my network to be 1000 for gigabit. Right now OSPF considers anything 100Mb or above as 1. My question is what impact can I expect on my network by making this change. I am going to do this on all...
Hallo, nach dem Verbindungsaufbau kommt folgende Meldung: Checking exit interface... Failed No configured DNS server(s) are routable through the selected interface.Es handelt sich um eine Standard PPOE Verbindung, gibt es eine Lösung ???
How do I setup the management vlan on a 2950? I have vlan1 now, but if I do a shut, enable vlan 20 with a new IP address, it does not work. I cant ping, or do anything. All traffic just stops on that switch which is weird. The FA 0/24 is configured a...
I have 8 3550 POE wiht the SMI image running. The problem is that i dont have physical control over all sockets connection to the switches. I want to have strict security over all ports and have been tinking of using the port security feature. But i ...
Hello ,I'm getting this error in E1 interface in our 3745 RAS server from time to time , atleast 3 to 4 times per day . When I get this error , e1 interface shows down and user's can't dial-in .What could be the problem?. I'm posting the part of "Sho...
Hi AllI currently have the following issue with two Cisco 4006 switches that are connected by a GigabitEtherne trunk. Configured for dot1q trunking.See output below.sh int gigabitEthernet 1/1GigabitEthernet1/1 is up, line protocol is up Hardware is ...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
.jpg "VIP Community Legend"){kind=icon}
.jpg "Hall of Fame Master"){kind=icon}
