Other Network Architecture Subjects

I have a daily command output saved within 'Batch Reports' feature of Ciscoworks and when trying to view an output, it gives me an error "The report output may have been deleted/or not accessible". I confirmed that the output data exists within the ...

Can we have two T1 spans with different time slots (one T1 with 23DS0s and other one with 24DS0s) configured as part of same MLPPP bundle? If yes, is there any performance impact with this versus 2 full T1s part of MLP bundle? Thanks

i currently have a working VPN configured using Cisco routers. i recently placed one of the routers, and now recieve the following message on the other (non-new) router... "IKE message has no SA and is not an initialization offer." Can anyone explain...

Okay I understand what vlans do and the purposes they can serve.But I have a few questions on theory.If im configuring lets say vlan 24 for Data on a 3550 and vlan 23 for the Management and vlan 11 for voice. VTP is running on all connected switches ...

I have a WAN with about 60 remote sites in a regular OSPF area, area 123. There are two ABS between area 123 and area 0. I would like to convert area 123 to a NSSA but need to minimize the down time incured by the remote locations. What method wou...

Hellosorry for the silly questions, but is there a way toconfigure GBIC's ports that they don't show auto-full and auto-1000?Gi0/1 connected 1 a-full a-1000 1000BaseSX any input is welcomeOliver

I know how to Collect CPU Utilization on Cisco IOS Devices Using SNMP with oid '1.3.6.1.4.1.9.2.1.58.0'.But this oid can't use with catos.any comments is appreciated.thanks!

Hi!I have a problem with an AS5350 with ISDN+PSTN. For some reason many clients have same credentials (U+P), and when these ones dialin through ISDN (only in ISDN is the problem) they get same IP (like there is a user-IP map inside..). There is a loc...

Hi. My 7206 router (OC3+ card) crashes when I try configure create on-demand on the atm point-to-point subinterface with a pvc range. I use aal5snap encapsulation. It chrashes the moment the second vc is going active and the crashinfofile tells me: "...

HelloMy IPM is generating only hourly latency reports. Daliy, weekly, and monthly reports are returning empty webpage. When i've tried to run "ipm regen" command to regenerate all reports, the script returned: "No data exists in IPM Database.".I have...

Hi AllImagine, 8 branch sites, each with a 512kbps/128kbps frame link to the next hop provider and a HQ with 2048kbps/512kbps (an IP-VPN situation). The branch sites have 20 people per site, each using resources out of the HQ such as email and the li...

Hi. I'm after a little advice (not being a professional network admin). This'll probably cause you guys to roll your eyes and mutter about amateurs... but I'd be grateful for any help anyone can give meI have a cable modem connected to a netgear rou...

I have a new Sup720 installed in a 6513 which from a show module displays the followingshow module Mod Ports Card Type --- ----- -------------------------------------- 1 24 CEF720 24 port 1000mb SFP 2 ...

Hifrom yesterday I have a problem with a Catalyst 6509.When I try to connect on the console I receive at any command the error message :ClearByIVC: WARNING, malloc failed!When I try to connect via telnet I receive the error:Failed to allocate session...