Hi if looged in as administrator on ciscoworks2000 can i kill a normal user session who is also logged in.If yes howRegardsKM
Hi if looged in as administrator on ciscoworks2000 can i kill a normal user session who is also logged in.If yes howRegardsKM
Does the 3550 keep an separate arp table for each port on the same vlan or does it only keep an arp table for the vlan?
Hi all,What's the equivalent command to "show multicast group" using IOS software?Thanks in advance.Regards,Sergio.
Hello,I am having a problem setting up Multichassis multilink for our AS5300. It seems that my stack groups are working. When I connect to both chassis I see different IP addresses being assigned to each virtual interface and the connection no long...
I just upgraded one of our 7206 routers from 12.2(18)S to 12.2(25)S and Fast Switching is now disabled. I tried the command ip route-cache on the interface but Fast Switching is disabled when you do show ip int command. Fast Switching was enabled...
I have two 3640s, sh version outputs show different "Parity" settings.. Ayyone knows the difference ? txsSerhatcisco 3640 (R4700) processor (revision 0x00) with 59392K/6144K bytes of memory.Processor board ID 24396934R4700 CPU at 100Mhz, Implementati...
I upgraded a 3640 to 12(5)T19 version and added a FE interface, and I used the same addresses as the former ethernet interface. When I didn't have network connectivity, I looked at the configuration and I saw I forgot to add one line, NO IP MROUTE-C...
Hello all,On CatOS it is possible to view topN reports with the helo of the show top ... command (i.e. show top int 10,...).Is it possible to do the same when running in native mode (IOS)?Thanks in advance for your help.Regards.Alex
(a dummy in router)My 3725 have 2 integrated FE 0/0 and 0/1 and a 16port ethernetNM. PC's connected to the 16port could PING each other but could not PING router through that 16port module. I made the PC's and the router on the same subnet.I cannot p...
How to enable IP Forwarding on CISCO 1700 Series and 2500 Series routers?
Example:C3725 has customer A,B and C connected to it. customer A is using 3 switches for there connections. each switch using 1 port on the c3725. Switch 1 and 2 will have 1 subnet/ Vlan on it 1.1.1.1 (Vlan1). Switch 2 & 3 will have 2 subnets/Vlans o...
hi all,is it possible to do bridging over GRE tunnels? I've found mixed results searching the forums thus far.my goal is bridge IP over the internet to/from 3 different sites.thanks.
Hi, Can I aggregate multiple E1 line and use it as 1 big pipe?
dear allafter write the netstat -n command on my PCsI found thant there are alot of session open port 445I chek what this port for .it is for (Microsoft-DS)I do not know what this port use for and how can I stop open this session Althouge I close the...
Dear All,Is there a place in the cisco website where i can download presentation materials regarding cisco products in ppt format to help me preparing presentation to my customer (like a presentation central). Thanks.Regards,Hendy Harsono
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
09-26-2024 02:28 AM | ||
08-07-2024 06:15 AM | ||
07-17-2024 11:08 AM | ||
05-29-2024 04:52 AM | ||
02-14-2024 04:00 AM |
User | Count |
---|---|
2 | |
1 | |
1 | |
1 | |
1 |