Other Network Architecture Subjects

I have two switch, cat3550-12G and cat3750-48TS. I want to connect two switchs with fiber. but adaptors type on two switch are different, one is GBIC another is SFP. Could I make a link between two switch using fiber cable with sc and lc connector ty...

I tried to remove system-cpp-policy class-maps and policy-maps from the cisco 3650 switch. And also AutoQos-4.0-wlan ACLs. But they didn't remove.   Getting following errors.:   % Class-map system-cpp-police-topology-control is being used       Syste...

we had Catalyst 3550 link to Black Diamond Switch which STP priority are set to 0. By setting cat3550 vlan STP priority to 32768, the cat3550 still become the vlan STP root bridge. Any way to prevent cat3550 from becoming the root here??

hiI don't know difference administrative and operational.Administrative Mode VS Operational Mode ?Administrative Trunking Encapsulation VS Operational Trunking Encapsulation?cat3550# show interfaces gigabitethernet0/1 switchport Name: Gi0/1Switchport...

Hi, With regards to the following terms: For All Cisco Copyrighted Materials2. Networking Element IconsCisco publishes and maintains a library of element icons for representing common devices in telecommunication and computer networks, for use by the...

Hi,     Recently at night my 6509-E switch generates many logs related to the temperature of the EARL, even though I have checked the room temperature which was very good. the logs starts generating always during night only between 00:00 and 8:30AM. ...

Dear Members,   I am looking for policy or priority based routing configuration. The scenario can be seen in the attached diagram. According to the diagram, some of the VIP client’s prefixes should be rerouted to provider 2 If I have congestion with ...

I have a loan switch that just serves as a PaGP dual-active detect connection to my exiting VSS.No other connections are on the switch.The PaGP port-channel is Layer 2, and passes just the Mgmt vlan.My questions is:I'm setting up a second VSS pair in...

I'm trying to upgrade my router via TFTP. I keep getting this File too large for TFTP error. I'm using the recommended TFTP server from Solarwinds.There does not seem to be any setting in the server to let large file pass, It's the first time I see t...

I tested with 122-25.SEB3, I could create route-map with tracking option but I could't apply it to the interface. the error message shown "PLATFORM_PBR-3-UNSUPPORTED_RMAP"Does it mean I can't put the multiple tracking route-map to the interface.Since...

Hi All,Have a requirement from customer,44 port 10 GbT32 unified portAdvance layer 3 ospf bgp supportedDoes 5596 can comply these requirements?Tried to configure combination of module but seems cant. Since we must purchase the layer 3 module right?An...

I had set my timeout interval to 1 sec . I don't know how to fix it . This is the command I had used (exec-timeout 0 1) Please someone help me to get out of this problem

I am trying to set a logging discriminator that will drom any message contans the mnemonics etc. "ABC" and "XYZ". As fists step I configure this:logging discriminator nolog mnemonics drops ABCbut when I am trying to add a second statement....logging ...