Other Network Architecture Subjects

We have three seperate 2514's connected to our 7206VXR serial ports. In the past few days at random times during the day all three links will drop with "retry limit expired". We first thought the problem was the serial card in the 7206 so we switched...

Dear all,on a central syslog server we are logging all messages from our routers that are fixed connected (leased-line,etc.). We find that information very usefull. We wonder if there is a reasonable way of logging information from dial-up routers as...

How can I determine the threshold rising level and falling level on a port storm-control?

Hi I have a 2621 with connected to a ISP. I ISP requires PPPOE authentication. The router authenticates fine. The ISP connection is on FA0/0, and the local lan (192.168.11.0/24) on fa0/1I cannot get any traffic through the router from the local lan t...

Is there a MIB that can be used to monitor FCS errors on a Catalyst 5500 Ethernet port? Thank you.

Currently we have a configuration in which a Cisco Catalyst 4006 is connected to a Dell PowerConnect 5212 at the distribution layer, which is inturn connected to a Intel Express 510T at the access layer. The VLAN Database, which should be distribute...

Hi, I made a typo at the ROMMOM prompt on a WS-X6K-SUP1A-2GE. Instead of typing BOOT= I typed BOOOT=. I can't find a way to clear this mistake. It shows up whenever I look at the "set". There is no "unset" command available. This should be an easy fi...

I have an issue that someone may be able to help with.We have a solution that uses a Cisco router to connect via 2 seperate PVC's to different locations for resilience. We use EIGRP and bandwidth statements to define which PVC to use as the primary.W...

Whats my best way for providing DHCP for a company having 1 server and several VLANS

what's the recommended way to create a LAN (same layer 2 segment) between 2 sites connected via PPTP T1?Thanks!

I have a multihomed network running BGP with 3 separate ISPs on a 3725 router. I have Public Address space (/24 net) that will be used for all internal hosts that need to be reachable from the public internet. But I also have several other internal...

Basic question: I have a 4006 switch with only a sup II engine. Can I use/enable vlans with this or do I need to upgrade to a sup III?

Dear All,Is is possible to run MPLS on a 6509 SUP1/MSFC2 running native IOS ?Will greatly appreciate any feedback.Regards,Zahid