We currently have one routing switch with a VLAN Domain for each site. The sites are connected to the WAN via T1's. We are now connecting sites via GB Fiber. We would like to continue routing at each site using the existing 3550G-12's (6 sites). ...
i have 2 2621 about 2.5 miles apart with single mode fiber between them. currently i am using media converts to go from the fiber to ethernet is there a card i can put in the 2621s that will take the fiber connection?is there an easy place on ciscos ...
I am setting up a network linking different locations using 2 Cisco 2610 and 4 Cisco 1721 routers. I want to see the computers on the different locations when i browse the network neighbourhood. please help.
I am planning a network, and need to design it with an internal router, switches, and external routers to seperate my network from the internet. I do need to have some internet access, but I want to have complete protection from un-authorised intrude...
Hi, i'm having some trouble getting the 2950 and the 3550 into the devices.xml file. I have tried to uppgrade the device view but i did not help. My versions are:cd one 4th edition I have put on the patch!ANI version 4, no patch, can't find any!CM 3....
Hi,I would like to monitor the ATM interfaces; which are connected as below: __________________ { }OR1x1 ------ ATM Switch Cloud ------- OR1x2 { }OR2x1 ------ ATM Switch Cloud ----...
Hi please somebady who knows - please advice.how many equal-cost paths are supported by IGRP ?how many unequal-cost paths are supported by IGRP?how many equal-cost paths are supported by EIGRP?how many unequal-cost paths are supported by EIGRP?
Can someone advise: 1. Which nachi (a,b,c,d etc) is sig3030 related to? 2. Which nachi (a,b,c,d etc) is sig2156 related to? 3. When were these two sigs released?Thanks,Simone.
5 days after enabling sig 3030, we are unable to view alerts from VMS MC running on a W2K server, 2CPUs, 2GB Mem and over 200GB hdd. To temporarily fix this problem, we have to delete (idspruning) the alarms every 2 days. The total alerts generated...
I am a little confused with what exactly does mini-RMON provide? I am using nGenius RTM, I added switches with embedded mini-RMON, but all I can see from Traffic Monitor are data layer statistics (link utilization). Does mini-RMON provide any stat ...
We are currently changing from HP 2624 switches to Cisco 2950s. On the HP switches we were able to ftp IOS upgrades from switch to switch. Is this capability available on a Cisco 2950 or 3550?
I got two Branch Offices(B & C) conencted to our Central Office (A) using dedicated lease line. These two branch offices connect to our Central Office for a database application hosted at our Central Office.Here is the cUrrent IP addressing setup for...
Im interested in buying a WAN emulator where I can simulate some of our WAN connections. We are currently developing a database that will be hosted at our Central Office. This application will then we accessed by our branch offices via point-to-point...
