Other Network Architecture Subjects

copy switch-config from one switch to another via "kron" job (using tftp/ftp or....) possible ?

Hi I try to copy the config file from one Switch to another switch via a KRON job. "TFTP-Server is a 3850" and client a 3560cgI've tried with all proto. tftp/ftp/scp ...if this possible ? thanksRené

Resolved! Packet drops in self ip of ethernet

Hello, When i am pinging the self ip of an ethernet intercface. it is having drops. rate limit is applied in it with ratio of 1:1/8. When i applied the rate-limit of in the ratio of 1:1. No drops occur. Please help us tio know the reason behind it. E...

Unable to browse web console using browser

I am connected to Cisco WS-C3750G-48TS. I am new to this field. When I am browsing the ip address in my nrwoser, I am able to access the home page. However, when I click on the web console, I am getting an error of "the webpage cannot be found". I a...

Resolved! Serial Number lookup tool?

Is there a tool/app/utility I can use to get device information (chassis only) by entering a serial number? I was going through a massive pile of retired equipment and didn't get quite specific enough with my device descriptions on some 3750's. Unfor...

configuration multicast

Hello THAT makes two weeks which I try to configure my router(route planner) Cisco 2800 series to manage a multicast. I would want a precise configuration and complete of this configuration. For example, I have connect my laptop on a port(bearing) of...

Route IP's through ATT Uverse

I have an 1841 router connected to ATT Uverse. ATT provides us with a /29 which is programed on their modem. I need to bring the entire subnet to the 1841 and route it into my network. Right now I can assign 5 IP's but the ATT needs to have the de...

What is the best solution to my company's needs?

Hi! I would like to know what do I really need for my company. Now my network runs slow. I have computers that are connected with my server in order to run the software (ERP), I have credit card readers, cameras, IP phones. Also I am connected with a...

Resolved! Stateless Address Autoconfiguration (SLAAC)

How can SLAAC (Stateless Address Configuration) generate a Global Unicast IPv6 address? I was reading some documentation on IPv6 that said SLAAC can be used to generate a global unicast IPv6 address. How can a node use SLAAC to generate a global unic...

Service problem with Cisco WS-C3750E-48TD-E won't boot

Hello.We have some problem with one of our switch.If we power on our Cisco WS-C3750E-48TD-E v03 with PowerSupply C3K-PWR-265WAC (also we tried C3K-PWR-750WAC)switch LEDs SYST and SPEED are GREEN. Other LEDs are Off. No any Amber LEDs,but switch could...

Resolved! Switch/Router initial configuration checklist

Hi, Wondering if anyone has seen a cheat sheet/checklist when initally configuring a new switch or router. For instance: Confiure hostnameconfigure correct passwordsconfigure NTPSNMP servers etc., etc. Thank you,John

How to read syntax of a cisco IOS .config file?

I am new to auditing cisco device (firewall,router, switch) configurations. I need to validate if the device settings comply with my company's Information Security hardening guidelines (NIST, CIS, DISA). I requested .config files from selected fire...

Increasing the ethernet interface of 7206VXR router

Hi All,Please i need someone to help understand if it is possible to buy extra Ethernet card for my 7206VXR-NPE-G1 router. The 3 gigabit ports are all in use and i need to know if its possible to buy extra cards for the router. If it is possible what...

Losing contact with 3550 when switching from VTP client to transparent mode

We have multiple cases of 3550 switches setup like this (pure L2):outside world - 3550 VTP server - 3550 VTP client - 3550 VTP clientwith VLAN trunks between the switches. If I am connected from theoutside to one of the 3550 VTP clients, and change V...

Resolved! 867VAE provisioning with config & IOS version

I am setting up a lot of 867VAE's and wanting to streamline the provisioning process.I already have a script that generates the full config based on a few inputs, and I load those on via USB drive and pressing the reset button.I have a specific IOS l...

Cisco WLC 5760 support for flexconnect

Hi, i know that currently the WLC 5760 doesn't support flex connect. Are there any plans for it to be supported and if so does anyone know when?

Other Network Architecture Subjects

Forum Posts

copy switch-config from one switch to another via "kron" job (using tftp/ftp or....) possible ?

Resolved! Packet drops in self ip of ethernet

Unable to browse web console using browser

Resolved! Serial Number lookup tool?

configuration multicast

Route IP's through ATT Uverse

What is the best solution to my company's needs?

Resolved! Stateless Address Autoconfiguration (SLAAC)

Service problem with Cisco WS-C3750E-48TD-E won't boot

Resolved! Switch/Router initial configuration checklist

How to read syntax of a cisco IOS .config file?

Increasing the ethernet interface of 7206VXR router

Losing contact with 3550 when switching from VTP client to transparent mode

Resolved! 867VAE provisioning with config & IOS version

Cisco WLC 5760 support for flexconnect

Get ready! Great things are coming to Cisco Community

Have your wish for humanity broadcast into space by George Takei!

New stancils for SD-style drawing

ISR 4331 - Netflow filter with ACL?

Java and Packet Tracer

Ping in CPT between different VLAN failed

I studied sso and nsf, but I'm not sure if I understood it correctly.

Real world network implementations

rated power consumption for cisco equipment

Implementing Mesh Wireless Network with Catalyst 9105 APs

wan connection

how to do Telnet to a router Cisco for UDP to port 500