Other Network Architecture Subjects

This is really  a crazy one. I have an ISR4451 the I need to upgrade, however I can't get TFTP to work on this device. I've done this many times, should be super simple. I've open TAC case and the engineer can't figure our why this does not work. I c...

CCP 2.7 can not run correctly on my windows 10 (community view is not completed)

Hi I have one Main location and 2 destination. I want to have 2 GRE tunnels one to each destination.The Problem is, that one tunnel in the Main location does not come up. (up/down).I've a Cisco CAT6500 at the Main location with 12.2(33)SXI4a.When I c...

Hello Networkers, I am currently facing an issue with the some users using up all bandwidth when they initiate large data transfers. The site has a 20Mbps Ethernet circuit and is used to connect to the corporate MPLS network.When a user tries to copy...

I need to move our ASA 5520 "inside" connections off of an old 3560 switch.  I have three options for the new connections: 1) connect to a 2K (2248).  2) attach directly to our Nexus 7k, OR 3) connect to a 3750X pair (stacked) which connects directly...

we created a username and password for ACS server via command line and it works, but when I open up GUI using IE, the username and password does not work.  I can SSH over putty but cannot log in on web gui

We are coming from RequestCenter version 2008.3 SP5 and have decided to do an upgrade of our product to Cisco Prime Service Catalog 10.0 R2. One of the challenges that we are encountering is the integration of CPSC to Remedy. We are currently doing t...

Hi I try to copy the config file from one Switch to another switch via a KRON job. "TFTP-Server is a 3850" and client a 3560cgI've tried with all proto. tftp/ftp/scp ...if this possible ? thanksRené  

I am connected to Cisco WS-C3750G-48TS. I am new to this field. When I am browsing the ip address in my nrwoser, I am  able to access the home page. However, when I click on the web console, I am getting an error of "the webpage cannot be found". I a...

Hello THAT makes two weeks which I try to configure my router(route planner) Cisco 2800 series to manage a multicast. I would want a precise configuration and complete of this configuration. For example, I have connect my laptop on a port(bearing) of...

I have an 1841 router connected to ATT Uverse.  ATT provides us with a /29 which is programed on their modem.  I need to bring the entire subnet to the 1841 and route it into my network.  Right now I can assign 5 IP's but the ATT needs to have the de...

Hi! I would like to know what do I really need for my company. Now my network runs slow. I have computers that are connected with my server in order to run the software (ERP), I have credit card readers, cameras, IP phones. Also I am connected with a...