Other Network Architecture Subjects

my task is to manage cisco's 2948G switch using our Network Management System.I have decided to use "CISCO-STACK-MIB" for this purpose.Is my assumption correct?Switch has 48 10/100Mbps ports and 2 modular GigaEthernet ports with GBIC.But it does not ...

Can some one help me and tell me when it is best t use different topologies.And does the use of the network effect the topology e.g. if the network is used for databases can this effect witch topology that should be used etc.

Hi!I have some static nat translations in my cisco2620 like following:ip nat inside source static tcp 192.168.10.33 25 195.136.125.33 25ip nat inside source static tcp 192.168.10.34 25 195.136.125.34 25ip nat inside source static tcp 192.168.10.35 25...

I have seen someone put this thread on other forum,but i can't settle the problem.follow is the question.The network has a Catalyst 6500 be a core switch and down link to a Catalyst 2950, and Catalyst 2950 down link to a PIX 515e firewall, as below.....

n a 7576 chassis with 2 RSP4's, I can get an FEIP2 processor (with 2 fast-E's) to recognize in the second half (slots 6-12) but not on the first half. (slots 0-5) When I slide an FEIP into slot1, here are some of the errors I get. If anybody has any ...

Hi Can i know what does the x-bar in the following stand for? WS-X6516-GE-TX= Catalyst 6500 16-port Gig/Copper Module, x-barthanks

I'm reading about ISDN and I keep seeing reference to "rotary group". I can't seem to find any explanation on what exactly this is. I can see that it seems to be a combination of B-channels, but why the term rotary. Does it move from one channel to a...

Hi,I need to filter any routes that have either originated or traversed through AS100.Which of the following method is correct ?ip as-path access-list 1 deny _100_OR do i need two statementsip as-path access-list 1 deny _100_ip as-path access-list 1 ...

Scenario;Four routers in a broadcast (ethernet) single area. Two routers are level 2 routers as they reside in two areas. Routing is working as it should. Adjacencies have formed no problem. Both of these level two routers have FR connections to a hu...

I am trying to clear up some confusion. I havea VWIC-2MFT-T1 card in my 3660 router. I have aframe circuit in one of the interfaces. The planis to have more than 1 connection through this physical interface. I know that I can do this throughthe use o...

Hi folks,I have what I am sure is a simple routing problem, but I cant see where Im going wrong in my logic.I have a Data E1 link (between 2 x 26xx's).The link provides the only connection between two small office ethernet LANs.LANa---RouterA-----E1-...

Hi all,We have a cisco 2600 series router with 2-port channelized E1/PRI card. At central location we have the 2Mbps channelized E1 link mapped to respective remote location having 64Kbps leased link.Now that the primary link is E1 we want to configu...