Other Network Architecture Subjects

ITM 2.0 and IP Phone Info Utility does not discover phones

Hi,I've got a new install of ITM 2.0 withITM 2 IDU 1.0GW Stats UtilIP Phone Helpdesk UtilIP Phone Info UtilI have all the media servers and phone-supporting switches without any problems.In the IP Info Util if I try to add a discovery schedule for ph...

TCP Load Balancing

I have a cisco 3640 Router and behind that i have four terminal servers. I want the Cisco Router is do a tcp load balancing on roud-robin fashion between these four terminal servers when connecting from systems that are in the other side of the route...

load balancing on 3 serial links (1Mbps,2Mbps and 2Mbps) not load balancing

for some reason load balancing is not working the router is only using the 1Mbps link .....

How to configure Windows XP client and AS5300 access server for dial-out?

I have a Cisco AS5300 Access Server that is currently connecting to two ISDN/23 (under a prime number and within the same hunting group). Remote users can dial into Corporate network without problem. Now, I plan to let users to dial out via this AS53...

Cat3548 Console password

h'mm ... I set the console password on a 3548:config tline console 0password xcxcxcI copied run to start and reloaded.But I didn't get propmted for a password when I'm connected to the serial port.I want to control access to the switch via the consol...

DHCP conflict logging

The DHCP configuration quide states: "If you choose not to configure a DHCP database agent, disable the recording of DHCP address conflicts on the DHCP Server"Perhaps I don't understand what the purpose of the "(no)ip dhcp conflict logging" command r...

problem with my cable config

i have a cisco router 1605 R series and i have configured my router with DHCP. when i type sh ip interface brief i see my public ip.i ping known public ip addreses i get replies with no problembut with my pc i can't ping any ip address outside and c...

Frame Relay backup with Frame Relay with different DLCI #

I Have 3 sites, site A, B, C. A is HQ connected with FR to B and C. B is backup site. Usually B and C connect to the server located at A. In case the A FR and server is down C and A will access to B site. So they connect to B using different FR DLCI....

xmodem problems in router 1721

pls. help me guys!!!i have a problem with my cisco 1721 router i cannotfind the image only the rommon > prompt appeared. problems:"device does not contain a valid magic number.""boot: cannot open "flash:""boot: cannot determine first file name on dev...

Error 619 specified port is not connected

We have a 3640 with an NM-30DM and a NM-1CE1USince the router recently lost power unexpectedly many of our users when trying to dial the router using an analogue modem are unable to establish a connection and receive the following message:Error 619 s...

ip-prec mpls-experimental-field, dscp

hi, my question:if i have set a certain ip-prec value in an ip-paket and forward this frame over a mpls cloud then the pe-router will copy this ip-prec value into the mpls-header´s experimental field - right ?is this also true if i set the dscp-field...

static route and eigrp two questions

first: I use static float route to use backup interface,and destination are two net: 21.0.0.0,22.0.0.0 but when master interface serial down ,only the net 21.0.0.0 next hop chage to backup interface and net 22.0.0.0 still use default next hop (the ma...

Other Network Architecture Subjects

Forum Posts

ITM 2.0 and IP Phone Info Utility does not discover phones

TCP Load Balancing

load balancing on 3 serial links (1Mbps,2Mbps and 2Mbps) not load balancing

How to configure Windows XP client and AS5300 access server for dial-out?

Cat3548 Console password

DHCP conflict logging

problem with my cable config

Frame Relay backup with Frame Relay with different DLCI #

xmodem problems in router 1721

Error 619 specified port is not connected

ip-prec mpls-experimental-field, dscp

static route and eigrp two questions

what means about null in command (show ip cache flow) ?

ios of the router

trunk mode in IOS ver 11.2 c2900xl to talk to 12.0 cat3500xlpwr

Get ready! Great things are coming to Cisco Community

Have your wish for humanity broadcast into space by George Takei!

Host unable to access remote Host from behind ASA / Router

Re: Cisco device discovery

Re: help with log in router cisco ASR1001-X

Switching

Re: Ppoe automatic default route. &IP address

Routed port versus transit vlan for intervlan routing

Network card interface lights

Real multicast uses on the public internet

reboot after short power outage

CBS350-48Xt-4X missing UDP Relay and IP helper-address