I need some help with exporting Campus maps to Visio. I've tried the steps outlined in Campus user guide, but keep getting error message that the file is not a visio file. I never get the "Enter CISCO stencil file" window.
Hi,I have a catalyst 3550 and I am finding a high % of CPU is going on the VFM Queue Process. Does anyone have a idea what this process is? I've searched the Internet and cisco.com with no luck.Thanks
Hi, The problem I am having is this:Two Cisco 3900 Switch Stacks with 2 VLANS setup (VLAN 1003 & 1005) connected via Fiber uplinks. The Workstations on the switch stack closest to the DHCP server can obtain an IP address, but workstations attached...
If i have to Windows XP computers and i want to remote access in to one other what are the steps i would follow? One computer is dial-up and the other is DSL.
In running rmon2 and proprietary probes, recently, I began to receive flood traffic on the probe specific ports. I tried std acl port blocking but now I need to allow that specific port from specific ip blocks as authorized traffic while blocking al...
Hi all,My client was using netware 6.0 OS with a flat addressing scheme 172.20.x.y using layer 2 switches and hubs. We had now implemented a L3 core switch cisco 4506 with vlans. After creation of vlans, the users from different vlans can ping all th...
I have a 4500 switch and I'd like to enable port security on all workstation ports. Ideally, I'd like to have the MAC address dynamically learned and not have to do it by statically configuring MAC addresses on each interface. Is this possible? I ...
I know I'm showing my inexperience here, but I desperately need help. =) Installing a new 3745 router at our corporate office. I was unable to 'preconfigure' as I needed to remove WICs from existing router (3640) to add to new router so that I cou...
am not so clear about the ff.1. in a pure ios environment (6500) in sup2/msfc2, it was stated that it is using a bundled image. Does this mean, the same ios resides on both the sup2 and the msfc2?2. how can we check the os (6500) on the standby sup2 ...
What is the different in CPU an memory utilization in a 6500 between:utilization of PBR and a Cache Server Directorandutilization of WCCP with IP Spoofing ?
In my network, there are serveral VLAN's, of which, VLAN2 is quite a big segment (255.255.248.0). Recently, after a complete power shutdown of the building in my office. Some users on VLAN 2 is having diffculties reaching another machine (e.g PC1) un...
I downloaded a new IOS and copied it into the flash. How do I remove the old image file so the switch can boot to the new IOS image? This is a Catalyst 3550 SMI.
Forgive me if this has been a topic beaten to death but... I tried to upgrade my 2501's in my home lab to 16/16 and when I booted one up with 16MB Dram it shows as 14Mb and wondering why?The Boot ROM is 11.0(10C), another 2501 comes up with 16Mb Dram...
I am planning to use a 2610XM with a 16 10/100 EtherSwitch module. I want to allocate Vlan's to the Etherswitch ports but transmit the Vlans over the TCP/IP or Bridged interface on the 2610 router. This link will terminate on another router and then ...
