In 802.3 Ethernet protocol....if MAC address is not assigned to a Ethernet controller (i.e. 00:00:00:00:00:00) is it allowed to receive broadcast frames (FF:FF:FF:FF:FF:FF)?I mean ARP Request frames from other nodes in the network.~ Sandeep
In 802.3 Ethernet protocol....if MAC address is not assigned to a Ethernet controller (i.e. 00:00:00:00:00:00) is it allowed to receive broadcast frames (FF:FF:FF:FF:FF:FF)?I mean ARP Request frames from other nodes in the network.~ Sandeep
Hi Which part of the OSS does Cisco Prime Network provide? and what about Cisco Prime Provisioning? Is there any mapping table Between eTom building block and these Solutions?Please advice.
I have read the release notes for the various S/W versions that can run on this card and I have checked the Installation and Configuration note for this card. Yet I cannot fine the procedure to upgrade the S/W on the WS-X5410 card. What is the proced...
When I order ASA 5525-X IPS, can I specify how much Memory, Flash etc or is it 100% fixed? How about the switches such as WS-C3750X-24T-S ?
Hello All -I have a couple 3550XL's, one running 12.2(25)SEB4, the other 12.2(44)SE6. The ports are trunked and each has a Motorola Canopy AP connected with 900Mhz Subscriber Modules providing wifi using Cisco Meraki devices. I have hard coded ea...
HI im new to cisco device and i want to know about WS-X4K-CLOCK-E "Clock module"WS-X4590-E "Mux bufferWS-X4597-E "Fan tray"do these item include if we buy a 4507R-E?
Good day, dear colleagues.I need configure my PoE switches power OFF port at next time-rangeAt weekdays, power off at 20:00 power on at 8:00.At weekend - power off all days.I have next configuration port, example:energywise level 10 recurrence import...
Dear,Please suggest me how to configure on 2921 router data licence activation through TFTP server?
Hi ALL,I have a question.How hostnames configured through "logging <host-name>" command of "syslog" feature gets properly resolved to IPv4 or IPv6 address through DNS resolver in CISCO?OrHow "logging <host-name>" works?Does it resolve to both IPv4 as...
I have a few questions regarding the full redundant network solution. Please refer the attached network diagram.1. Assuming the switches underneath the firewall are L2, what are the main configurations needed on the switch and the firewall? For exam...
Ladies and Gents,My organization has a Nexus 7K that was previously set up by an external network engineer. It is part of my job to manage it. Radius was configured but it was configured incorrectly(pointing to the wrong radius server). I corrected t...
As I understand it, Cisco differentiates between an update (free, bug fixes only) and an upgrade (requires purchase, new features.) If I want to get the latest update (i.e. free) how do I know what versions I'm eligible for? For example, I have a WS...
I am trying to figure out if I can fill every EHWIC expansion slot on my Cisco 2911 router with VWIC3-4mft-t1/e1 cards giving me a total of 16 t1 ports?
Cisco 1841 can't configure what i am doing wrong. Setting up network for my project. Please help
Hello , we have a problem with the Access point aironet 1200 : Somebody know, how to solve this error message ? Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
02-20-2024 07:45 AM | ||
02-15-2024 09:08 AM | ||
02-14-2024 04:00 AM | ||
11-10-2023 09:28 AM | ||
11-09-2023 09:30 AM |