Other Network Architecture Subjects

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Webinar

 

Forum Posts

We are looking at building a couple of Linux clusters to store and process some large volume data sets (2 x 6 TB in 0.2-0.5GB granules). I am interested in finding out more about how the Cisco switch backplane will handle these connected clusters if ...

cmolony by Level 1
  • 382 Views
  • 3 replies
  • 0 Helpful votes

I am having a problem with a CISCO 2600 and it`s ethernet. I had configured it`s ip address and routing protocol with sucess. When I use the command "no shut" the interface comes up ok.... and the routes are placed on the routing table normally. But ...

vladrac by Level 1
  • 400 Views
  • 2 replies
  • 0 Helpful votes

I'm attempting to force certain subnets out via one of our upstreams:Our 7206VXR does one-armed routing (Multi Port-Channel sub interfaces)!interface Port-channel1.501 description DFX_Internal encapsulation dot1Q 501 ip address 203.149.69.1 255.255.2...

mbellears by Level 1
  • 317 Views
  • 3 replies
  • 0 Helpful votes

I'm having a problem with my current network. currently we are experiencing a network loop. here is a part of the log.0000.e24c.f463 has moved from port 22 to port 20 in vlan1%RTD-1-ADDR_FLAP: FastEthernet0/19 relearning 5 addrs per minPort 19 is con...

remmus by Level 1
  • 1338 Views
  • 13 replies
  • 0 Helpful votes