hi everybody, i need help again. i connect a 1720 router from the ethernet port to one of the 2820 switch port using a cross cable. the ip address i set for the router is 10.169.226.145 and the ip address i set for the switch...
I'm having a problem with my current network. currently we are experiencing a network loop. here is a part of the log.0000.e24c.f463 has moved from port 22 to port 20 in vlan1%RTD-1-ADDR_FLAP: FastEthernet0/19 relearning 5 addrs per minPort 19 is con...
Hi,does anyone have a 2950 with Ios c2950-i6q4l2-mz.121-13.EA1b.bin on it ?If i try to change the spannig tree priority accept all the value except one .The command spanning-tree vlan 1 priority 32768 will instead set priority as 49152 !Thanks,Patri...
Recently, I configured some security options on my routers.- disabled Bootp service w/ command "no bootp server"- disabled redirect w/ command "no ip redirect"- disabled ip directed-broadcast w/ command "no ip directed-broadcast"Then, DHCP client c...
Anybody seen this error when installing QPMI am trying to install Common Services 1.0 on a Windows 2000 Server, Service Pack 2 box.And in the "Configuring CCS SQL components" part of the installation, I get this error message - a pop-up window that s...
I am new to Cisco products and this site and am completely overwhelmed by the vastness of the selections and options offered here. Just need someone to help bootstrap me here and I think I'll be fine.I am looking for a 'box' , as inexpensive as possi...
We have 3524, 3548, 2950 (SMI) and 3550 (SMI) switches. Can I sniff the traffic on all ports by plugging in to one of the ports? Or can I sniff traffic on one siwtch by being plugged in to another? I know I can't by default. What's the best way ...
Hi, I have configured Enhanced Object tracking for HSRP on two of my Cisco 3745 routers running IOS ver 12.2(15) T.I have configured the HSRP to track the Ip route reachability. But I am using static routes to do my routing. There is no dyanmic rout...
I also need to have 2 FE interfaces in the 7206VXR to connect it to our backbone. Can you also pass me a link to a document that explains the bandwidth limitations of the 7206VXR and
I am running about 30 1721 routers with T1 WICs and 12.2(13)T IOS. Generally they run without a hitch. However, I have noticed that every now and then the routers stop "talking" to other hosts via the FastEthernet0 interface. When this happens the...
I am getting the following error when I access CW2K: Authorization error. An invalid response was received from the authorization servlet. Try logging in again. Any known fixes ?
I've got a 3550 connected directly to a 2610, a 2611 and many PC servers. The routers direct traffic from two different ISP's to my servers. The servers each have a default route to one of the routers, and each router NATs the internal addresses t...
We have a network with 3 subnets, 1 for workstations, 1 with private addresses for networked printers and switches, and 1 used by another company sharing our network infrastructure. There are no vlan's configured since traffic is fairly light. The...
I am new at this and was told to see if i could find out if it was possible to use private IPs, and public IPs on the same network. we would like to assign our printers private IPs and be able to print to them using our Public IP workstations, someon...
