I am implimenting new network as an expansion to an existing network.Customer has a WEB server meant for intranet users having IP address 90.0.5.10. At the final stage,I will move that web server in to new network segment having address of 172.20.50...
Hi I have a 2600 with 4 sites connected over FR. They were working fine until today I had all the 4 PVC's status was showing DELETED. There was nothing wrong from the telco side. When I restarted the router the PVC's came ACTIVE again. Anyone has an ...
Hi alli have two gateway routers connected to two different ISPs, each router connected to one ISP.each router is running EBGP with the ISP connected to it, and we only recieve default routes from the ISPs, IBGP is running in my network.how can i loa...
Hello all,Our infrastructure has two sites, with two routers at each site. The routers are configured for HSRP with an IP address of .201. The physical IPs for these routers are .3 and .4. Yesterday we lost connectivity between the two sites. I w...
I was unable to find a MIB that trap the ethernet interface status change. I could trap on the generic up/down trap but the IFindex for the ethernet interface are different across the product range. Any Suggestions
On a Catalyst5513 we have about 60 ports configured intoparticular VLAN (VLAN-ID: 110) and users can work well.But the Usertracking Application in Cisco Works 2000does not record any user/host in that VLAN.Hosts belonging to other VLANs on this switc...
I have the next situation:1 * Cisco 3620 (R4700)-24576K/8192K-IOS:c3620-is-mz.120-17a1 * cisco WS-C2950-24 (RC32300)-20402K-IOS:c2950-i6q4l2-mz.121-11.EA1I want to setup a TRUNK between the 3620 and the c2950. The problem I face is: I am only able to...
Hi,Just wondering if anyone knows if there is a difference between the following:PIX's inside is 10.10.10.4MSFC VLAN 10 - HSRP Primary Active's IP is 10.10.10.1 --> defaulte gatway is 10.10.10.4Workstation on 10.10.10.x pointing to gateway 10.10.10.1...
Hi Friends, I am Facing problem with MRTG Config. any one pl. guide me on proceeding further.. here are the steps I followed on an NT Machine.1. Configured SNMP Public string with RO on Cisco router.2. generated mrtg.cfg file ...
We just received a Catalyst 6509 with two WS-sup720 supervisor engines. I'm just wondering of any any gotchas before we put this switch into production.thanks.
I am trying to set up a ACL that restricts traffic comming into the network through serial 0. I am using a cisco 1721 router with the IOS firewall feature set. When I implemented the ACL below it blocked all traffic going out. I could not even ping o...
Hello,I am trying to put together a home CCIE lab, would the 2521 be sufficient as a frame relay switch? Or do i need something with more ports (2522 or 2523) also, would I be able to use both the Async and Sync serial interfaces on the 2521 with my...
