Hi all,Does any body know what's the difference between these two interface commands in 3550:1. mls qos trust cos2. switchport priority extend trustThank You!Best RegardsTeru Lei
We wish to connect a number of serial interfaces to our network using NAT. To allow the various subnets (outside) to view the server host (inside) as belonging to their address space we want to NAT multiple static global addresses to a single static ...
Has anyone experienced the following problems with a Cat 6500 with dual Sup 1A .%SYS-1-MOD_INVALIDSEQ:Bus asic invalid sequence occured on module 8 2003 Mar 20 14:16:53 %SYS-1-MOD_INVALIDSEQ:Bus asic invalid sequence occured on module 92003 Mar 20 14...
I have RME 3.4 and use the CSV file format for importing devices into CW2K. Due to a renaming scheme going on thru the network I will need to delete several devices per day from our CW2K servers. What is the CSV format for the Delete from File foun...
Hi all,i have the szenario below: Cat1(EMI) Cat2(EMI) ----------------------- --------------------- I 3550 I------I 3550 I ------------------------ ----------------...
I have a Catalyst 2950C switch running 12.1(13)EA1 code, connected via a dot1q trunk to a 2620-XM router, running 12.1(18). The router is routing between three different VLANs. From the switch, when I ping the default gateway (on the router) I will o...
I am trying to SPAN an entire VLAN to port on a 3524. I want to span all of the VLAN traffic in the domain to a port, not just local traffic. I don't see a way to do this as spanning a VLAN this way doesn't appear to be an option on 3524 ports? Is th...
I am wondering if it is possible to send start-stop records to two AAA servers at the same time. I need authentication to only go to one server, but need the CDR records for a specific billing process seperate from the customer AAA box.I seem unable...
Hi,I' m trying to configure a Cisco 3640 with 4 BRI and 12 Digital Mica Modem.Callback with analog modem is working fine.I' m having troubles with ISDN callback.On ISDN q.931 debug cisco router, when it starts to call, receive the following message: ...
I am new to the 3550 and to L3 routing on the switch. I need to create 3 vlans(no problem) with no routing between the vlans, then route all the Internet traffic from each vlan out one port to a PIX. The PIX config is no problem.vlan100 \-----------...
--begin ciscomoderator note-- The following post has been edited to remove potentially confidential information. Please refrain from posting confidential information on the site to reduce security risks to your network. -- end ciscomoderator note -- ...
Greetings, I currently have a BBSM network at a hotel. They are having problems with Macintosh ONLY connecting to the network. On their computer, the "Connect" button is greyed out.There are no issues with PC's in the same room on the same port.Any...
Hi 1. We have two 6509 switches with msfc.one for routing odd vlans and other for routing even vlans. 2. When I give a trace route from odd vlan ( ex vlan 3 ) I reach the gateway of even vlan then the router interface.3. The same trace from even vlan...
