Other Network Architecture Subjects

Dear Sirs:Two Catalyst6509 with SupervisiosII and MSFC2 in a campus network ,the two switch are in the core layer of the network,and the HSRP is working. I don't know if the MLS configuration is correctly configured. Followed the configuration of th...

hi, I try to get access to the console of 2620 with out success, Can I access the configution thru ethernet 0 on thru IP.thank you

Hi,I have big LAN & WAN network with cisco devices.and also i have non cisco devices connected to this network,stcattered all over the network.I want to identify this non cisco devices using cisco network.Is there a way to identify Non Cisco devices...

I have a 1600 series router and a Caymen DSL router connected to the switch. How can I pass the remote site ip traffic from the 1600 to the caymen router out to the internet.Thanks!

Hi,I am looking for a fast switch that connects about 50+servers with Gig and Fast ethernet connections. I do a lot of backup between servers. I am looking at 6509 and 4507. I know a 6509 switch has 32 G backplane and upgradable to 256G. A 4507 h...

Anyone have a script I could use to modify the names of switches on my network? I have to modify half of the name of each switch to a building mneumonic so that we can tell where all the switches are located by looking at the name. Thanks in advanc...

I have a 1600 series router and a Caymen DSL router connected to the switch. How can I pass the remote site ip traffic from the 1600 to the caymen router out to the internet.Thanks!

HelloColleagues,It's looks like after upgrating IOS on 7401ASR (NSE) and 7206VXR (NSE-1) to Version 12.2(15)B, SNMP subif (Gigabit Ethernet) counters have broken. Somebody has the same problem? And in what version counters will work correctly?

Does the cat 4506 basic IOS supports RIP version 2 ?

Network Labeling Techniques-----------------------------------------Hi All,I’m really confused as I start reading about the Network labeling techniques for large and scalable network that serve both Data and Voice, I went through the ANSI/TIA/EIA 606...

Hi,.I cannot recover the 2611 IOS from rommon. Please guide me based on the following output. I tried several IOS but always same result...System Bootstrap, Version 11.3(2)XA3, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)Copyright (c) 1998 by cisco Syste...

Hi,I want to use ipx routing , but my ios - 12.2(11)T2 - support only ip protocol. What I must to do? How can I download another version of ios which support both protocols - ip & ipx.Thanks for any help.Tomasz Janusik