Any idea as to why this is happening?
Any idea as to why this is happening?
We had a device on the lan with a back nic (receive side) that was sending out a continuous arp to an address on it's own subnet, but not seeing the arp response since it's receive circuitry was bad. An 6509 with sup1/msfc1 is the default router for...
Interfacing with Cisco 6732, from NE providing DS3, TDM, Non-channelized. The current interface card in the 6732 is the DS3 ATM. From the data sheets there is also a DSX3/CHNL card available. The description indicates the DS3 needs to be channeliz...
Hello allI need to configure our CSS11000 to redirect traffic to our web site from a specific domain/host to another site without redirecting other traffic from the site. Basically, we want this particular customer to enter http://www.something.com a...
What is necessary to change the Management Interface from VLAN1 to VLAN 500 on a Catalyst 3550.
What is necessary to change the Management Interface from VLAN1 to VLAN 500.
Hello,I have built a small LAN with Hubs and an Internet Sharing Box model 200E of NEXLAND to share internet access.In order to increase LAN performances, I have replaced the Hubs with catalyste 2924 XL switchs, but instead I 'm experiencing slower ...
Hi all,I am experiencing problems with authenticating at an ISP via CHAP on a PPPoE / DSL line. Everything looks like that just the password is wrong, but I checked a couple of user/password combinations with them and get always access denied. PPP/CH...
Dear Sir,I config AS5300 with callback, the signal between AS5300 and telco is E1 R2,there are 20 circuits for dialin, and there are 100 circuits for dialout, I found sometimes callback was't successful, So I use the command "debug modem csm" to obs...
HiI want to find people who have a experience with mapping X.25 pvc to svc and to XOT tunnels in cisco routersmiroslaw.pomian@pl.ibm.com
hi,i tried the following cbwfq-config on my fr-subinterface on an cisco3640 router:( i want to implement hierarchical-policy based on framerelay pvc )!class-map match-any bank_kematen match access-group name bank_kematenclass-map match-any bank_pich...
All,Any idea when the 802.3af Inline power standard will be ratified? Are 4000/4500 series inline-power ethernet line cards upgradable to this standard via firmware or daughterboard upgrades?Regards & thanks,Mike O'Sullivan
Can someone please explain this to me.On my Router I have two static routes to subnets on my Partener's Network , Users have no problems connecting to Servers on my Partener's network. Yesterday I started getting complains Users could not connect to ...
hi,i have catalyst 3548 running ios ver 12.0(5.3)WC(1)when i ping to his address i get a slow response and from time to time i get request time outReply from 172.16.0.103: bytes=32 time=129ms TTL=254Reply from 172.16.0.103: bytes=32 time=28ms TTL=254...
Received the following Error meesage while booting...WS-X4014 sup not supported in WS-C4507R chassis, system can not bootRebooting in 10 seconds...10 09 08 07 06 05 04 03 02 01 00
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
02-06-2025 07:58 AM | ||
02-06-2025 05:07 AM | ||
01-22-2025 07:00 AM | ||
01-22-2025 05:28 AM | ||
12-30-2024 06:12 PM |
User | Count |
---|---|
3 | |
2 | |
1 | |
1 | |
1 |