Hello,I have built a small LAN with Hubs and an Internet Sharing Box model 200E of NEXLAND to share internet access.In order to increase LAN performances, I have replaced the Hubs with catalyste 2924 XL switchs, but instead I 'm experiencing slower ...
Hi all,I am experiencing problems with authenticating at an ISP via CHAP on a PPPoE / DSL line. Everything looks like that just the password is wrong, but I checked a couple of user/password combinations with them and get always access denied. PPP/CH...
Dear Sir,I config AS5300 with callback, the signal between AS5300 and telco is E1 R2,there are 20 circuits for dialin, and there are 100 circuits for dialout, I found sometimes callback was't successful, So I use the command "debug modem csm" to obs...
hi,i tried the following cbwfq-config on my fr-subinterface on an cisco3640 router:( i want to implement hierarchical-policy based on framerelay pvc )!class-map match-any bank_kematen match access-group name bank_kematenclass-map match-any bank_pich...
All,Any idea when the 802.3af Inline power standard will be ratified? Are 4000/4500 series inline-power ethernet line cards upgradable to this standard via firmware or daughterboard upgrades?Regards & thanks,Mike O'Sullivan
Can someone please explain this to me.On my Router I have two static routes to subnets on my Partener's Network , Users have no problems connecting to Servers on my Partener's network. Yesterday I started getting complains Users could not connect to ...
hi,i have catalyst 3548 running ios ver 12.0(5.3)WC(1)when i ping to his address i get a slow response and from time to time i get request time outReply from 172.16.0.103: bytes=32 time=129ms TTL=254Reply from 172.16.0.103: bytes=32 time=28ms TTL=254...
Received the following Error meesage while booting...WS-X4014 sup not supported in WS-C4507R chassis, system can not bootRebooting in 10 seconds...10 09 08 07 06 05 04 03 02 01 00
Does anyone know why my 6509 will occasionally query an entire subnet with ARP requests? It's pretty infrequent (maybe once an hour or once ever 2 hours) but when the router sends out a massive broadcast (2 ARP requests per IP for the entire class C...
Can someone help me please, I have two C3550 and two C2950 switches. whenever they are rebooted they loose date and time. I do not have NTP clock on my network. Is there any way I can permanently configure date and time on these switches.If not then ...
I've been doing this for almost 20 years but I deal with dumb management and out-of-control user groups. I'm interested in CISCO DOCUMENTATION specifying LAN/Broadcast domain size guidelines. Please, no "opinions" I have enough of those.Thanks!
Hello all - I'm missing something here - but I'll ask anyway... :) Take a look at the BGP Case Studies (Case#5, Practical Design Example) at: Watch the wrap. http://www.cisco.com/en/US/tech/tk648/tk365/technologies_tech_not...
HiExact message: 2003 Jan 21 16:46:51 MET +01:00 %PAGP-5-PORTFROMSTP:Port 2/20 left bridge port 2/202003 Jan 21 16:47:10 MET +01:00 %PAGP-5-PORTTOSTP:Port 2/20 joined bridge port 2/20I know the URL http://www.cisco.com/warp/public/473/34.shtml#PAGP_M...
