Other Network Architecture Subjects

Hello, My name is Alexandru Nitulescu and I want to integrate CiscoWorks 2000 with HP Openview. I have a CiscoWorks 2000 Lan Manager installed on Windows 2000 machine and a HP Openview installed on HPUX 11i machine. I want to integrate theese two sof...

Hello, our customer wants to use a catalyst4006 with supervisor-engine3 foranswer the dhcp-requests.I think the commands for "ip dhp pool xxx" and the other commands will only work with a new ios-release.But in the documentation there is no informati...

HelloI have 2 vlan and they mus communicate, so i found yhat i need to use the SVI, and i don't know to use it.Thanks

I'm buliding a 'mini-LAN' with a Catalyst 2950-12 and W98, W2000 PCs. There's no router, no servers, no DNS. I just want all PCs to see each other in LAN. Switch has no special config. I don't know why, but W98 can't see W2000 and vice versa. W2000 P...

Attempting to update the files that are used when observing the Out of Sync Report. I have copied the configurations so that from the device the configuration files are in sync. I have updated the archive, Resource Manager Essentials > Configuratio...

Hi there..On a 6509 doing a show proc cpu among other things I get Earl NDE Task with a high percentage.Searching the CCO I found that Earl is Enhanced Address Recognition Logic but NDE could not be found.Anyone having an idea?

The router is configured to use NAT using the standard FastStep Setup method. The computers have their gateway set to the IP address on the router. The router is constantly dialing up day and night. Is this the router or are the computers activating...

R1 | ____________|___Ethernet_____________ | | | | R2 R3 . . . . . . . . . . . . Link1 . . Link2 . Lin...

Hi all,In 3550, when use "mls qos trust cos" the swith with trust the cos value of the frame in that port. If I don't use it, will the switch override the cos value? If it will, why should we use "mls qos cos override" command? Can anyone tell me? T...

Hi guys,I am having a problem with Internet work Performance Monitoring, i have configured sources, targets,collector all that, but when i open up the clients console, i cant view statistics, infact i cant see the configs i have done.Help highly appr...

we have a cache engine 500 series whose IOS got erased accidently.now i am trying to load new IOS and i am not sure about the procedure.Please guide

The aironets in my lan are running on 12.01T because of dot1q. i saw on the interface statistics in 3 days round about 700MB of traffic without any client connectet. so i did a further look and sniffer. its traffic destined to 01-04-96-ff-ff-ff-00. w...

Is there a way to trace MAC Address.I always have problem in finding the Designated Root device from the MAC Address. (Designated Root 00-10-0d-b1-78-00)Cat 6509> (enable) sh spantree 1 VLAN 1 spanning-tree enabled spanning-tree type ieee Designated ...

Can Cisco Works and VMS be installed on the same server? If not what are the known issues? I have CW2k 5th edition installed on a W2k serverIf not what are the known issues? Thanks for you help.

Hi Friends, Whenever a traceroute is done from Windows Dos Prompt, We get <X ms < Y ms < Z ms against each Hop. what does this denote.? is it max, min average time response or any other notation?RgdsKalyan