Other Network Architecture Subjects

I need to use static NAT translation and dynamic NAT translation. How should I go about configuring it on my router? Do I have to specify the dynamic NAT range to include the static translation? Please advise on this. Thanks very much.

Hi, I tried to load an IOS image on a cat 2924XL using xmodem, but always receive a I/O error, the switch do not have any image and always boot on room monitor. Any Idea??

What is 2224 input errors and 2224 Frame errors on my Cisco Switch. Is this a cisco IOS bug?My current IOS is 12.0(5)WC3B on 2900XL switchFastEthernet0/37 is up, line protocol is up Hardware is Fast Ethernet, address is 0007.5091.05e5 (bia 0007.509...

Is it possible, I know it should be, to run a PPPOE connection via the DSL modem to the router? the output from the DSL modem is Ethernet.Any help would be appreciated.- Thanks

Hi anyone pls help out.... I have three routers. Each at a remote site. RouterB and RouterC will call to RouterA as required by using dialer profiles and dialer idle-timeout 60.RouterA:Loopback0 - 10.10.68.1 255.255.255.128e0/0 - 10.31.7.3 RouterB:Lo...

Is it possible to load balance between two ports on a 2924XL and a 1548?

My 3548XL is currently on RPS power only. But I need to remove the RPS temporarily during business hour. If plug in the AC power and disconnect the RPS, will the switch stay on-line? Is this possible? Thanks.--Chuck

We're looking to move about 450 DSL subs (some come in over a DS3, others over IMA'ed T1s) into a 7206/7204VXR platform with a PA-T3 and a 8-port T1 IMA card. We don't do PPPoE or DHCP, all customers have static IPs, and we plan to use RBE once we m...

I have setup a client/server network(lan) consisting of one win2000 server and four win2000 pro clients. what I want to do is connect further three win2000 pro clients from three different locations based from home.The question one: what hardware and...

I am trying to configure several Cisco 2600's with Async interfaces as terminal servers on our network for OOB managment, the problem that I am running into is with the Catalyst switches, if the catalyst switch is not not running TACACS+ for authenti...

Hello,Please, witch in the earliest ios version offering ethernet Full duplex on Cisco 2600, 3600 and 7200 routers for different Ethernets modules and i/o.Sincerely yours,

Dear Users,Trying to setup some dial-peers. I getting a problem with the frist dial-peers entered works but the onces after do not work. This is only for the 1850 and 1851.Here is an show dial-peer voice summary?"IPVMR01#show dial-peer voice summaryd...

Could somebody explain this error message:Nov 20 07:10:55 ERROR:9 statsparser.c@959: File selected for parsing is /usr/users/svplus/incoming/TEST-B1.112020020700 at time:Wed Nov 20 08:09:15 2002Apparently, the 1st timestamp (Nov 20 07:10:55) is the ...