How can I configure a 3500xl or 2900xl with an IP address that is not part of VLAN 1? I would like to assign the management interface of my 3500xl to a different VLAN.
How can I configure a 3500xl or 2900xl with an IP address that is not part of VLAN 1? I would like to assign the management interface of my 3500xl to a different VLAN.
I have a VERY weird problem. I have this kind of setup on 6 locations, and on two, I have the weirdest problems.routers: C2610IOS: 12.0.7TWhen contacfting our mail server (SMTP), from a NAT:ed IP, the "conversation" always dies after rcpt to is sent...
The 3550 IOS version is 12.1(6)EA1. I use help-address to forward DHCP request. But it cant work. When I debug ip udp, I can see 3550 forward udp 139 to help-address, but not forward udp 67,68.
My new LAN wil have 37 Catalyst switches (02 Cat 6505, the backbone).I am considering to create 04 vlans. Questions :Should each VLAN use different subnetworks ?Which Vlan my DHCP server must be placed into ?How does the DHCP server know what IP addr...
We have acquired several switches which used ot be configuredc as part of a VTP domain. While we know we can set the switches to transparent and they will not partake in a VTP domain, we wish to have the switches back to a factory default settings fo...
I've noticed that my aniserver.log file has grown to over 3 gigs on my CW2000 Windows 2000 server. After running the LogBackup.pl script to clean up all log files, it actually grew by 1 gig while the others were squeezed down in size. I thought tha...
Help,I have installed a new MSFCII module on a Sup1A on a Catalyst 6009 but am unable to see Module 15.I have upgraded the Cat OS to 5.5(4a) and have also tried 5.5(10a) both of which are suppose to be compatible.The Sup1A bootstrap ROM is at 5.2(1) ...
if i have to disable oam-manage pvc option for an tm interface how and where to do it
We are atempting to install the CiscoWorks 2000 NMS integration on a Sun server with Solaris8 and NNM 6.2.Actualy the NMS is located on a Sun Machine and CiscoWorks2000 on a windows 2000 server. So I thought it was possible to install only the NMS in...
Hi:When I try to boot my 2950, it return "permission denied" error. It will drop to the switch prompt, and if I do a "dir flash", it return "permission denied" again. Below is the outputPlease help.. thanks... AndySystem resetting...C2900XL Boot Load...
Hi all,I need to set up network monitoring through web browsers using MRTG, over my network I had 2 Cisco 2503 router, 1 Cisco 2950 switch, but I do not reallyknow what to do? What are the setting I need do at the router and the switchand also at the...
Can someone tell me the difference between CAR and traffic shape for limiting bandwidth rate access?Best Regards.
We would like to lock down a WAN connection using access-lists. This is as well as others security products, the main reason for this is to limit what goes across the links.I have created an access-list that permits the main application ports that we...
1)NM-1CE1U just only work on ISDN?2)NM-1CE1U has the dsu/cus?3)what is the controller ? it 's a hardware ?4)NM-1CE1U i can use it seperate the clear E1?5) IF i have 30 branch offices ,i can use NM-1CE1U connect to clear E1 ,and then make 30 office...
What is the difference btw EMI and SMI?So if they are different what are the things that one can do while the other can't?If i am using it for access layer in an enterprise network, which image would u recommend?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
09-26-2024 02:28 AM | ||
08-07-2024 06:15 AM | ||
07-17-2024 11:08 AM | ||
05-29-2024 04:52 AM | ||
02-14-2024 04:00 AM |
User | Count |
---|---|
2 | |
2 | |
1 | |
1 | |
1 |