Other Network Architecture Subjects

Hello,I'm running RME an Performance monitor as part of the Ciscoworks Common Services that is installed as part of Cisco Security Manager.  I installed CW Common Services and CSM first and added all the licenses needed.  After that I installed RME a...

Hi people,I work on a network with about 1000 switches/routers of which a hundred of 2950 switches (2950G, 2950ST and so on...).We monitor the network with some management tools such as Groundwork, Netcool and CiscoWorks LMS (via ICMP). Randomly for ...

We have 3500Xl series switches and some are running port monitoring so we can gather data on what kind of traffic is flowing through our network. The question is if 1 ethernet port is monitoring all the other ethernet ports on it, what kind of perfor...

Hi all,On my network i am trying to give preference to certain traffic type A over another traffice type B  over a VSAT link.the VSAT link is about 64Kbps/64Kbps and this link is connected to a router subinterface.I initially thought of CBWFQ to rese...

Hey guys, I've been sifting through cisco doc's online and still can't find a solution to my problem.. perhaps I'm missing something..I have a Cisco2821 router and its not detecting a NME-16ES-1G-P card..Cisco IOS Software, 2800 Software (), Version ...

Is it possible to run Multilink PPP on 2 T1s while also doing transparent bridging?If so, Do I need to put bridge-group 1 on my multilink interface?thx

Hi, all! I have 2 Cisco 2821 routers with the same configuration. IOS c2800nm-spservicesk9-mz.124-25b.bin.When i try to get ifInOctets|ifOutOctets on subinterfaces via snmpwalk, an the one router is all OK, but other returns me zero.For example:IF-MI...

Hello, I have a 2621XM router which I obtained secondhand (used). I have been through 2 of these routersalready where I have encountered the same problem;namely, that whenever I install more than 64MB ofDRAM (96MB or 128MB), the unit fails to recogn...

We've been doing some lab tests with energywise and one area we have a query with is wireless based on this page - http://www.cisco.com/en/US/prod/collateral/wireless/ps5755/ps6301/ps6305/brochure_c02-519055_ps10195_Products_Brochure.htmlWCS is shutt...

Hello to everyone, the purpose of this post is to better understand cisco EnergyWise solution and the Cisco building Mediator. Please keep in mind, I am just studying this solution so please be patient with me.The big question is:  Cisco Building Med...

I have issue with following configuration:two ports in same vlan. Multicast traffic received over one of interfaces got flooded to second one.Sample config:interface GigabitEthernet1/0/20 switchport trunk encapsulation dot1q switchport trunk allowed ...

Hi,I need detailed technical information about this product:Voice specificationRF upstreamRF DownstreamMechanicaletc.I already have this docs but are not enough. http://www.cisco.com/en/US/docs/video/at_home/Cable_Modems/2200_Series/4016653_A.pdf  ht...

I have a partner who is trying to add a newly discovered device to their Smart Care contract,and received the following error: A device type mismatch occurred. The required data could not be collected from the device.Part number is correct, he has en...