Other Network Architecture Subjects

I have twou routers connectet via ISDNZyxel -------------------- Cisco 1600When I do a PING from the Zyxel to the Cisco box, I receive the ping reply on the second b channel. How can i prevent this behaviour?I only want to use a single channel.Thanks

I have tried distribute-list,but it didn't seem to work for OSPF,but it does work when using EIGRP.

Want to discuss about SDH/PDH & DXX

I installed one WAN link on my Fast ethernet . It is of 128 Kbps. Now i want to set the CIR limit of 128 Kbps on it. How can i do it?I gave the command :rate-limit inupt 128000 16000 16000 conform-action transmit exceed-action droprate-limit output 1...

I know I've done it before,and now I can't get it to work. I entering config t/line vty 0 4/login/ but it won't let me enter login. It wants me to put Authenticaion after it. I am not sure what this means. Can someone let me know what I am doing wron...

during tests on FRR I found out that when the main tunnel and the backup tunnel have the same head end, FRR is notworking fine. there's traffic lost.not that many as with normal IGP convergce.When the main tunnel and the backup tunnel have a differen...

Can I Integrated the HP OV NNM 6.2 for Windows 2000 with CiscoWorks.??

When configuring a tunnel you entering a command tunnel mpls traffic-eng bandwidth 500this means a tunnelbandwidth of 500k. Is this a minimum guaranteed bandwidth, because during tests, if we are sending more than 500 k over this tunnel, there's no p...

Dear all,I'm having this problem launching either "secure web client" or "web client" from CiscoWorks2000. I've tried to launch the client via web with both Port 1741 and 1744 itself but it is not working on both ports. It will return an error with h...

problem related to Access list Wildcard address.Given 172.16.16.0/20 bit subnetmask.we need wildcard mask for this.according to me it is 0.0.15.255 (wildcard mask),i want to know is it correct.ple reply as soon as possible.

Can I query all my cat6K 6348 modules with Cisco Works or can I only see the modules one switch at a time. I need to identify those factory defective 6348 modules throughout my campus??

I need a final answer on the subject of, can cw2k and/or dfm support/monitor/ping/snmp query any non cisco switches or routers (Cabletron...)?

My question is this: When using a router with two WAN links connected to two different ISPs will devices configured with static IPs be able to communicate both directions if the primary feed fails?I believe that if all of your addresses are handed ou...

Have had trouble getting dhcp addresses from NT4 server to clients in VLANS. All VLANS configured with helper address of NT4 server which resides in management VLAN. Do I need to add persistent routes to NT4 server for each vlan's gateway address for...

A hotel management company wants to deliver personalized data to an in-room guest through the Internet or the television. Prefer the Internet. What questions do I need to ask to understand what they need and how will can the hotel deliver a custom ...