We currently have a single 1.5mb connection to the frame cloud and management has decided to add another in hopes of 'bonding' the connection to the cloud to 3mb. I don't think bonding in that sense is possible from our 3640. What are some options?
Please help me!I have looked over & over that the formula to configure CAR & it still makes no sense.Can someone please explain this too me?normal burst = configured rate * (1 byte)/(8 bits) * 1.5 secondsextended burst = 2 * normal burstIs the config...
We have a requirement of routing few hosts from only one EBGP link, by this we want to achieve that both inbound and outbound traffic from selected hosts will be forwarded only from the desired link and not from the other, and if the desired link is ...
I have a Cisco 2611 router which I use to connect to the internet but at the same time to some remote sites. I have a firewall between this router and my internal Cisco 2610 router which connects my LAN and other remote sites. My company says it can ...
I have a 1720 router connected to ISP with leased line for nearly two years. It worked fine before last month the leased line speed upgraded to 256Kbps. After the upgradtion, it often automatically reload. I check the memory, it has 16M bytes DRAM. W...
Hi,(First of all, this is my first big network job, so please bear with me :)I'm reorganising the network for a organisation (about 100 PCs) and I'm considering using a pair of cat5000 as distribution and core layer. The layout of the network consist...
I see document for config VLAN between C2948G-L3 and C2900. I can work with C2950-24 and ping all VLAN. The port trunk not problem, but with C3548 is impossible. I tested with port-channel and subinterface, but not. The interface down/up, up/down all...
Hello.I have a 8 port BRI card on a 3660. I am trying to assign IP addresses to all the 8 ports from the same subnet. But the moment I am on the 7th port, it gives an error saying too many addresses on the same subnet. It lets me assign only 6 Ip ad...
CW2K LAN Mgt Solution comes with Campus Manager that allows auto-discovery of network devices.in CW2K RWAN, am I right to say that CW2K only allow Manual adding of devices and importing of files from other NMS? CW2K RWAN is the only nms for the netwo...
Here's my setup:RouterA with 2 Serials into an F/R cloud connecting to RouterB with 1 Serial into the F/R cloud.Do both sides need MFR configured in order to talk or RouterB simply have F/R encapsulation on his serial interface?If there are pvc's on ...
How to clear/reset the number of match display by the policy-map or the class-map.For example "show policy-map interface e0/0" referring to. Service-policy input: drop-inbound-http-hacks Class-map: http-hacks (match-any)5 packets, 300 bytes5 minute o...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
