Other Network Architecture Subjects

Hi need to select a router, I already have a 128kbps NTU with V.35 interface.And have already 2 domains for the two different divisions of my company.What I need is:-Connect my office LAN (20PC's) to the Internet for email and regular www browsing.-P...

Hi, does anyone know how to configure a cisco router to enable a VPN session(IPSEC?) from a Sonicwall Client VPN from Internet to pass through. I'm using a Cisco 2500 series leased-line router with IOS 11.3 with IOS firewall. What must I include in...

How I can undelete a image from the ROMMON> in a L3 card (WS-X4232-L3) of the Catalyst 4006, if you dir bootflash: the file is deisplayed but it has a (deleted) at last of the file.

I need to simulate a t1 in the lab. I saw the answer to this here a long time ago, does anyone remember what the pinout is for a t1 crossover cable? Thanks in advance

nt

Hi,I tried configuring frame relay back to back config as per Cisco docs. But i am not able to ping either ends. Any comments.Refer this site for the configs. http://www.cisco.com/warp/public/125/frbacktoback.htmlShanky

With reference to Alonza-Garza's conversations (4006 RSM question WS-X4232-L3), I'm also trying to set up a Cat4006 (in a test area) with a layer 3 supy card (separate card) and I'm confused why there needs to be a 'native' Vlan for management purpos...

If you have a telnet session running to at router and jump with a telnet or SSH to another host. Is it then possible to log all information/commands going into that session??

Hopefully you can point out my mistakes here.I can ping the Extreme, but can't ping the 3500XL nor either server. All connections are 802.1q trunk links. The native VLANs for Server23 and Server24 are 23 and 24, respectfully. Sorry for all the x's......

I am setting up a VLAN lab but I have a question on the 4006 RSM configuration options. Assuming that my RSM is in MOD 2, I understand that from the SUP II's point of view it sees 2/1 and 2/2 connected because he see's the 2 "internal" Gig channels ...

whitch IOS version in the L3 (WS-X4232-L3) module of the catalyst 4006 support NAT

There is a template in RME->Configuration Management->NetConfig that allows you to change the enable password:set enablepass%OLDPASSWORD%************If I try to create my own template that changes both the user and priveleged mode passwords, using th...

I have CiscoWorks 2000 on my network. Every 4 hours, it collects inventory and configs from a pair of 7507 routers. When I view the router logs, I am getting SNMP CPU hog messages for the get next procedure. Apparently, CiscoWorks is causing perfo...

The cisco doc http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/wan_c/wcdfrely.htm#xtocid7 says that when you configure static mapping, it will automatically disable the in-arp. but When I configured a static mapping in multipoi...

I have a Cat2948 running 5.5(2)with multiple vlans configured. I have 2 Intrusion detections systems that I would like to install on 2 of the vlans configured on this switch. Can I span one vlan to one span port and another vlan to a different span p...